Title: Manuals manuals manuals
Post by: timsmore on January 14, 2006, 03:43:19 pm
The HUGE, approx 1000 page, manual has been picked apart and this is what I have. Individaul sections and information include the following. I found the in depth information on the theory of refrigeration unique for sure. Pictures, diagrams, schematics it's all there. If what I have is close to something you need let me know and I will double check that I didn't miss something. As questions are asked I will edit this section below so that becomes more and more clear as to the contents of the manual.
1. Electricity
2. Principles of Refrigeration
3. Frigidaire Refrigerating Units
4. Westinghouse Refrigeration Units
5. Coin Mechanisms—National Rejecters
6. Cavalier Coolers-Open Top Wet and Dry Coolers Models FE-3,
6, 6V, 10, CM-6W, and 10W, C-27, CM-51V Installation,
Operation, Service and Maintenance Also parts lists for FD-2,
10 and CM-10D
7. Mills Coolers Model 65, 120-B2
8. Vendo Coolers---V-23a b and e, 59, 39, 83, Vendo 6 Case 9. 9. Vertical, V-144, V-216, V-80, 81, V-110, V-242, 27, 33, 44,
88, 139, 149, A149, A340, 340 Operation, Service,
Maintenance and
Warranty on each
10. Westinghouse Coolers---Open Top Wet CoolersWE-3, 6,
and 10, Open Top Dry Coolers WD-5, 12, and 20, BV-240,
BV-56 parts List for Westinghouse Coolers many different
model.
11. Victor--- CPV-500, 275, 803 DATED 1958---Vendo
ACCESSORIES, REFRGIERATION ---56, 81, 110 HOW TO
VENDING MECH, HOW TO ON COOLER, TROUBLESHOOTING
WHEN VEND DON’T WORK, MAINTENANCE
I will be scanning each section and then as each of you determine the section that you may need, confirm with me and I will be able to get it to you as either a .pdf or put on a CD and mail to you. Let me know how large a file you ISP will allow and if fits I will email it. ALready some of the sections are pushing 9 megs
1. Electricity
2. Principles of Refrigeration
3. Frigidaire Refrigerating Units
4. Westinghouse Refrigeration Units
5. Coin Mechanisms—National Rejecters
6. Cavalier Coolers-Open Top Wet and Dry Coolers Models FE-3,
6, 6V, 10, CM-6W, and 10W, C-27, CM-51V Installation,
Operation, Service and Maintenance Also parts lists for FD-2,
10 and CM-10D
7. Mills Coolers Model 65, 120-B2
8. Vendo Coolers---V-23a b and e, 59, 39, 83, Vendo 6 Case 9. 9. Vertical, V-144, V-216, V-80, 81, V-110, V-242, 27, 33, 44,
88, 139, 149, A149, A340, 340 Operation, Service,
Maintenance and
Warranty on each
10. Westinghouse Coolers---Open Top Wet CoolersWE-3, 6,
and 10, Open Top Dry Coolers WD-5, 12, and 20, BV-240,
BV-56 parts List for Westinghouse Coolers many different
model.
11. Victor--- CPV-500, 275, 803 DATED 1958---Vendo
ACCESSORIES, REFRGIERATION ---56, 81, 110 HOW TO
VENDING MECH, HOW TO ON COOLER, TROUBLESHOOTING
WHEN VEND DON’T WORK, MAINTENANCE
I will be scanning each section and then as each of you determine the section that you may need, confirm with me and I will be able to get it to you as either a .pdf or put on a CD and mail to you. Let me know how large a file you ISP will allow and if fits I will email it. ALready some of the sections are pushing 9 megs
Title: Manuals manuals manuals
Post by: jasmine64 on January 14, 2006, 03:45:39 pm
What is exactly the info on Cavalier coolers # 6?
Title: Manuals manuals manuals
Post by: timsmore on January 14, 2006, 04:06:18 pm
I will swing by my office tomorrow and bring the Big Book home along with my scanner. I know alot of you had shown interest in purchasing sections or specific machines so I'm going to get each section scanned as a .pdf. Already some sections come to about 8 megs. and about 100 pages.
Title: Manuals manuals manuals
Post by: Creighton on January 15, 2006, 12:59:47 am
Tim,
Really appreciate the effort you have put into this!! I'll take 1 copy of all.
Please PM the price.
Thanks!!
Creighton
Really appreciate the effort you have put into this!! I'll take 1 copy of all.
Please PM the price.
Thanks!!
Creighton
Title: Manuals manuals manuals
Post by: Ltransam on January 15, 2006, 02:06:02 am
Tim . 
I also Appreciate your hard work !!! I'd like a copy of everthing also .PM you $$
Ltransam
I also Appreciate your hard work !!! I'd like a copy of everthing also .PM you $$
Ltransam
Title: Manuals manuals manuals
Post by: timsmore on January 16, 2006, 12:31:20 am
I updated what machines are covered.
Title: Manuals manuals manuals
Post by: Jim on January 16, 2006, 10:02:24 am
This listing has the same info/models as one of my original manuals.
Tim,
What resolution are you scanning at...?
Tim,
What resolution are you scanning at...?
Title: Manuals manuals manuals
Post by: timsmore on March 01, 2006, 11:45:32 pm
10 chapters have been scanned. Curled, wavey paper from being in the protectors have slowed me but hopefully this week all will be scanned as individual chapters and in .pdf format. 
Title: Manuals manuals manuals
Post by: collecture on March 01, 2006, 11:54:20 pm
Tim,
Wow, that is a lot of work. I would be happy with sections 7, 8 & 11. I think I have the rest. Please PM me a price.
Wow, that is a lot of work. I would be happy with sections 7, 8 & 11. I think I have the rest. Please PM me a price.
Title: Manuals manuals manuals
Post by: MoonDawg on March 02, 2006, 11:03:34 am
I'd like to purchase #2------#8-------and #11
Title: Manuals manuals manuals
Post by: sodaworks on March 02, 2006, 11:30:43 am
I'm interested in 2,5,8,11. 
Title: Manuals manuals manuals
Post by: timsmore on March 02, 2006, 11:12:09 pm
Done through 13!!! I will make sure I complete tomorrow while I'm at work. I think I will qualify as an Army Print NCO after this. (No that is not an actual job) 
Title: Manuals manuals manuals
Post by: Pat Pixley on March 02, 2006, 11:27:13 pm
Tim, please putme down for 1,2,6&10 and on cd would work for me.
I will p.m. with my address and please let me know what I will
owe you.
Thanks
Pat
I will p.m. with my address and please let me know what I will
owe you.
Thanks
Pat
Title: Manuals manuals manuals
Post by: jasmine64 on March 03, 2006, 09:41:56 am
What type of scanner are you using?
I know that there is a face-up book scanner on the market that will
scan pages and evens out any page scanned. (EX curved page shows it flat)
Beats the heck out of a desktop computer scanner.
I think Minolta has some. Ebay has them all the time. Not a large selection
but a few.
My states Archive and History uses one for research projects.
I know that there is a face-up book scanner on the market that will
scan pages and evens out any page scanned. (EX curved page shows it flat)
Beats the heck out of a desktop computer scanner.
I think Minolta has some. Ebay has them all the time. Not a large selection
but a few.
My states Archive and History uses one for research projects.
Title: Manuals manuals manuals
Post by: timsmore on March 03, 2006, 12:25:01 pm
Here in my office I have HP 9100C Digital Sender. It will even do color. I've been told the cost is around $4,000. Yes, I would like to thank the tax payers, which includes me for this awesome machine.
Title: Manuals manuals manuals
Post by: timsmore on March 06, 2006, 06:36:20 pm
Just a quick update to show the stack now that I have finished the last section. I will now organize and repost what is in each of the criss cross stacks. This is how I scanned it into the individual .pdf files. 
Title: Manuals manuals manuals
Post by: loman4ec on March 06, 2006, 07:02:19 pm
WHen this is all done what do you want for a copy of them.
Title: Manuals manuals manuals
Post by: timsmore on March 07, 2006, 12:01:28 am
Scanning of the MANUSCRIPT is complete!!!
1289 pages total. It will be $10.00 a section. This way you don't have to get what you may not need. I'm just hoping to get close to the $175.00 I have in so my wife won't kill me. (I don't own any of these machines) If you have already sent a check let me know what it is you would like sent. Most internet providers now I believe will let up to 10 megs to be sent. The complete manual came to just about 80 megs. I have no problem putting any of these or all on a CD and mailing at no extra charge. Let me know and I will have them coiming through the internet or to a mailbox ASAP. Money orders or checks but will have to wait until they clear. I hope this helps a lot of you out and maybe, just maybe, someday I will own one of these classic machines!
Breakdown of the Service Manual
Section 2 General Work Practices
How to maintain coolers and be effective as a serviceman. Scheduling, Field Repairs, Shop Repairs and Overhauling and Preventive Maintenance.
Section 3 and 4 3 is blank and 4 is Electricity
Basic principles of electricity broken down for everyone to understand
Section 5 Principles of Refrigeration
Simple to understand theory including history, scope of mechanical refrigeration, heat and refrigeration, heat transfer, relative conductivity of various materials, measurement of heat, table of specific heats, transfer of heat and change of state, latent heat and sensible heat, pressure, refrigerants. Then mechanical refrigeration including laws of refrigeration, compression cycle, operation of compression cycle, a typical compression cycle, design of units.
Section 6 Frigidaire refrigerating Units
Complete service and maintenance, parts replacement for the following refrigerating units: Cavalier FE-3, 4V, 6, 6V, CM-6W, FE-10, CM-10W, FD-2, C-27, CM-51V, FD-10, CN-10D, FD-20, V-83, 6-CASE VERT, JACOBS J-26 or J-35. Data tables for Frigidaire Capacitor Wattage, Thermostat Settings, and Refrigerating Unit Data. How to understand a Frigidaire Wiring Diagram. Warranty, Ordering Procedures and parts lists. Email if yours is close and I’ll check for coverage.
Section 7 Tecumseh and Blissfield Refrigerating Units
Operation, service and maintenance, warranties, ordering procedures and parts lists.
Section 8 Westinghouse Refrigerating Units
Westinghouse refrigerating units for wet coolers and dry coolers, operation and service and maintenance information. Refrigerating units for vertical dry coolers models BV-240 and BV-56. Once again if yours is close ask.
Section 9 Coin Mechanisms
Slug rejectors, mechanical actuators, coin changers. Explains what happens as you insert coins and how to service and do maintenance.
Section 10 Cavalier Coolers
Cavalier Open Top Wet Coolers FE-3, FE-6, FE-6V, FE-10, CM-6W, CM-10W installation, operation and service and maintenance. Cavalier Open-Top Dry Coolers FD-2, FD-10, FD-20, CM-10D, FD-20D installation, operation service and maintenance. Cavalier dry vendor Model C-27 installation, operation, service and maintenance. Cavalier dry vendor model CM-51V installation, operation, service and maintenance.
Section 11 Missing
Section 12 Mills Coolers
Model 65 and 120-B2 operational service and maintenance, warranty ordering and parts lists.
Section 13 3 sections it was so large Vendo Coolers
Models V-23A,B,E, 59, 39, 83, VENDO 6-case vertical, V-144, 216, 80, 81, 110 warranties, ordering procedures and service and maintenance.
Section 14 3 sections Vendorlator Coolers
Models 242, 27, Dual 27, 33, VMC-139, 149, A149, 340, A340 installation and operation, service and maintenance, parts and parts lists. Ask for specifics or if yours is in here.
Section 15 3 sections Westinghouse Coolers
Open top wet coolers WE-3, 6, 10 service and maintenance. Open top dry coolers WD- 5, 10, 12, 20, 22, BV-240, 56, installation and operation. Variations of the listed models. Ask!!!
VENDO Directory
Accessories, common assemblies, ordering procedure, refrigeration, warranty and coolers V-56 M.D., V-81 M.D., V-110 M.D. Looks very detailed parts information.
I'm traveling to Los Alamitos, CA Tuesday and return Thursday. PM me with questions. I'll try to log in while there. Thanks everyone.
1289 pages total. It will be $10.00 a section. This way you don't have to get what you may not need. I'm just hoping to get close to the $175.00 I have in so my wife won't kill me. (I don't own any of these machines) If you have already sent a check let me know what it is you would like sent. Most internet providers now I believe will let up to 10 megs to be sent. The complete manual came to just about 80 megs. I have no problem putting any of these or all on a CD and mailing at no extra charge. Let me know and I will have them coiming through the internet or to a mailbox ASAP. Money orders or checks but will have to wait until they clear. I hope this helps a lot of you out and maybe, just maybe, someday I will own one of these classic machines!
Breakdown of the Service Manual
Section 2 General Work Practices
How to maintain coolers and be effective as a serviceman. Scheduling, Field Repairs, Shop Repairs and Overhauling and Preventive Maintenance.
Section 3 and 4 3 is blank and 4 is Electricity
Basic principles of electricity broken down for everyone to understand
Section 5 Principles of Refrigeration
Simple to understand theory including history, scope of mechanical refrigeration, heat and refrigeration, heat transfer, relative conductivity of various materials, measurement of heat, table of specific heats, transfer of heat and change of state, latent heat and sensible heat, pressure, refrigerants. Then mechanical refrigeration including laws of refrigeration, compression cycle, operation of compression cycle, a typical compression cycle, design of units.
Section 6 Frigidaire refrigerating Units
Complete service and maintenance, parts replacement for the following refrigerating units: Cavalier FE-3, 4V, 6, 6V, CM-6W, FE-10, CM-10W, FD-2, C-27, CM-51V, FD-10, CN-10D, FD-20, V-83, 6-CASE VERT, JACOBS J-26 or J-35. Data tables for Frigidaire Capacitor Wattage, Thermostat Settings, and Refrigerating Unit Data. How to understand a Frigidaire Wiring Diagram. Warranty, Ordering Procedures and parts lists. Email if yours is close and I’ll check for coverage.
Section 7 Tecumseh and Blissfield Refrigerating Units
Operation, service and maintenance, warranties, ordering procedures and parts lists.
Section 8 Westinghouse Refrigerating Units
Westinghouse refrigerating units for wet coolers and dry coolers, operation and service and maintenance information. Refrigerating units for vertical dry coolers models BV-240 and BV-56. Once again if yours is close ask.
Section 9 Coin Mechanisms
Slug rejectors, mechanical actuators, coin changers. Explains what happens as you insert coins and how to service and do maintenance.
Section 10 Cavalier Coolers
Cavalier Open Top Wet Coolers FE-3, FE-6, FE-6V, FE-10, CM-6W, CM-10W installation, operation and service and maintenance. Cavalier Open-Top Dry Coolers FD-2, FD-10, FD-20, CM-10D, FD-20D installation, operation service and maintenance. Cavalier dry vendor Model C-27 installation, operation, service and maintenance. Cavalier dry vendor model CM-51V installation, operation, service and maintenance.
Section 11 Missing
Section 12 Mills Coolers
Model 65 and 120-B2 operational service and maintenance, warranty ordering and parts lists.
Section 13 3 sections it was so large Vendo Coolers
Models V-23A,B,E, 59, 39, 83, VENDO 6-case vertical, V-144, 216, 80, 81, 110 warranties, ordering procedures and service and maintenance.
Section 14 3 sections Vendorlator Coolers
Models 242, 27, Dual 27, 33, VMC-139, 149, A149, 340, A340 installation and operation, service and maintenance, parts and parts lists. Ask for specifics or if yours is in here.
Section 15 3 sections Westinghouse Coolers
Open top wet coolers WE-3, 6, 10 service and maintenance. Open top dry coolers WD- 5, 10, 12, 20, 22, BV-240, 56, installation and operation. Variations of the listed models. Ask!!!
VENDO Directory
Accessories, common assemblies, ordering procedure, refrigeration, warranty and coolers V-56 M.D., V-81 M.D., V-110 M.D. Looks very detailed parts information.
I'm traveling to Los Alamitos, CA Tuesday and return Thursday. PM me with questions. I'll try to log in while there. Thanks everyone.
Title: Manuals manuals manuals
Post by: Creighton on March 07, 2006, 01:10:16 am
Tim,
$130.00 for the whole thing correct? Let me know and funds are on the way.
Thanks for all the work!!
Creighton
$130.00 for the whole thing correct? Let me know and funds are on the way.
Thanks for all the work!!
Creighton
Title: Manuals manuals manuals
Post by: loman4ec on March 07, 2006, 10:13:46 am
If someone wanted a copy of each would you discount? I am sure some of those sections are rather small, and I really don't need them all but if you are sending some you might as well send them all. Do you take paypal?
Title: Manuals manuals manuals
Post by: collecture on April 27, 2006, 09:49:49 pm
Tim,
Received the CD today. It is awesome!!
Thanks a ton...you are the man!
Received the CD today. It is awesome!!
Thanks a ton...you are the man!
Title: Manuals manuals manuals
Post by: sodaworks on May 04, 2006, 11:07:01 pm
Hello Tim,
Just wondering if you recieved my M.O. for the disc?
Thanks Terry@Sodaworks
Just wondering if you recieved my M.O. for the disc?
Thanks Terry@Sodaworks
Title: Manuals manuals manuals
Post by: Jim on May 05, 2006, 04:40:52 am
Thanks Tim!
Received the CD the other day...
Received the CD the other day...
Title: Manuals manuals manuals
Post by: Kevin C on May 17, 2006, 08:27:15 am
Tim
Let me recheck your listing because I ordered off the first listing.
Kevin
Hey how is your CV project coming?
Let me recheck your listing because I ordered off the first listing.
Kevin
Hey how is your CV project coming?
Title: Manuals manuals manuals
Post by: sodaworks on May 19, 2006, 09:44:08 am
Hello Tim,
Just wondering if you recieved my M.O. for the disc?
Thanks Terry@Sodaworks
Just wondering if you recieved my M.O. for the disc?
Thanks Terry@Sodaworks
Title: Manuals manuals manuals
Post by: sodaworks on June 08, 2006, 07:20:25 pm
For whatever reason I never did recieve the manuals from Tim.
Lucky for me Creighton sent me a set of copies. Creighton thank you very much!! It's really nice that other members here help each other out. When your ready for your bottle door to be painted just send it to me....
Lucky for me Creighton sent me a set of copies. Creighton thank you very much!! It's really nice that other members here help each other out. When your ready for your bottle door to be painted just send it to me....
Title: Manuals manuals manuals
Post by: Creighton on June 08, 2006, 07:47:03 pm
Terry,
Just glad to help!! Have a recommended machine shop to punch the center. Will get it to you ASAP.
Thanks!
Creighton
Just glad to help!! Have a recommended machine shop to punch the center. Will get it to you ASAP.
Thanks!
Creighton
Title: Manuals manuals manuals
Post by: Pat Pixley on June 08, 2006, 09:39:10 pm
I too would like to thank Creighton for sending a copy of
of his CD to me .
Some reason I never got the copy from TIM and he only got back to me once, and that was the last I heard from him ...
SO thank you Creighton for helping us out.
Talk to you later
Pat
of his CD to me .
Some reason I never got the copy from TIM and he only got back to me once, and that was the last I heard from him ...
SO thank you Creighton for helping us out.
Talk to you later
Pat
Title: Manuals manuals manuals
Post by: Jim on June 09, 2006, 12:40:07 pm
Hello all,
Things have been a little busy around my house the last month...
With that said, I have to apologize for not being around as much as I would have liked... I will be uploading some sample documents up to the Soda Jerk Section over the next week in the hopes of making information available. As we move forward with this, I would like feedback on organization of materials, errors I've made or any other input to aid in making this easy to navigate and acquire the information...
Thanks
Things have been a little busy around my house the last month...
With that said, I have to apologize for not being around as much as I would have liked... I will be uploading some sample documents up to the Soda Jerk Section over the next week in the hopes of making information available. As we move forward with this, I would like feedback on organization of materials, errors I've made or any other input to aid in making this easy to navigate and acquire the information...
Thanks
Title: Manuals manuals manuals
Post by: dr galaga on June 09, 2006, 01:19:48 pm
I was thinking that there could be one pinned topic that had a list (with links) of the different manuals and other items arranged by manufacturer. As people put items up on their accounts, or have to remove them, they could reply to the pinned message. An Administrator changes the information in the pinned message and deletes the reply. This way we don't have a message that is 10 pages long! (I guess I'm volunteering for this)
Is the plan still to try to get members to store the manuals wherever they have some space so it is not hogging the available space at SMC?
Is the plan still to try to get members to store the manuals wherever they have some space so it is not hogging the available space at SMC?
Title: Manuals manuals manuals
Post by: BryanH on June 09, 2006, 07:05:29 pm
Well if you want... I went through all Tim's PDF's and removed duplicate pages, resorted pages that were out of order and combined/split files to keep pages from a machine being split across files. I don't have room to post them anywhere but would be happy to share them to save other 
<anal> members from having to do the same effort.
I also gave Tim a list of pages missing... If he gets those rescanned (I think he's in the middle of moving) I'll integrate them into the docs also.
<anal> members from having to do the same effort.I also gave Tim a list of pages missing... If he gets those rescanned (I think he's in the middle of moving) I'll integrate them into the docs also.
Title: Manuals manuals manuals
Post by: bubba on June 09, 2006, 07:46:08 pm
If storage is an issue, I can make an ftp site available to upload and store manuals and other info... I have 2 sites for my company that are just small websites, with huge storage. Bandwidth wouldn't be an issue either. I can setup a ftp account to upload, and I can password the directory so its only available to who you want to give access to. I don't know if I can set individual accounts though--- Its not a ftp server, just a webhost. I do plan some day soon to get my ftp server back online also.
Title: Manuals manuals manuals
Post by: dr galaga on June 09, 2006, 08:17:04 pm
That's nice of you Ken. I'm sure some of the gang will take you up on the offer. I was looking around and came across Yahoo's Briefcase. It offers up to 30MB of storage. Looks like we may not need this now, but just wondering if anyone has used it before.
Title: Manuals manuals manuals
Post by: Creighton on June 09, 2006, 09:08:52 pm
I have a storage space if need be. The problem I see, is unless there is backup somewhere the information could be lost, broken links etc... Say I have manual A on server B and reconfigure/shutdown server B. Manual A is gone.
I would be more than happy to contribute funds to increase storage space here on SMC. We could also run a mirror site so that the "eggs are not in one basket".
Creighton
I would be more than happy to contribute funds to increase storage space here on SMC. We could also run a mirror site so that the "eggs are not in one basket".
Creighton
Title: Re: Manuals manuals manuals
Post by: burnt mind on January 09, 2013, 07:29:27 pm
Tim
I am new to this site, so bare with me if i mess up. :smile:
I was given a square top Vendo 56 many years ago and it is in presteen codniton... absolutely no rust.
I am goignt completly restore the machine to factory level, or as clsoe to it as possible.
I was wondering if you might have all the service and other documentation for this machine availabel because i have only seen the round top manals on line.
Please let e know
Thanks so much :help:
I am new to this site, so bare with me if i mess up. :smile:
I was given a square top Vendo 56 many years ago and it is in presteen codniton... absolutely no rust.
I am goignt completly restore the machine to factory level, or as clsoe to it as possible.
I was wondering if you might have all the service and other documentation for this machine availabel because i have only seen the round top manals on line.
Please let e know
Thanks so much :help:
Title: Re: Manuals manuals manuals
Post by: Creighton on January 09, 2013, 07:36:30 pm
Welcome to the site! Tim's set of doc's did not include ST's. Check with the sponsors of the site. They might have one.
Yikes, a 7 yr old thread. I do still have plenty of storage space :-)
Creighton
Yikes, a 7 yr old thread. I do still have plenty of storage space :-)
Creighton
Title: Re: Manuals manuals manuals
Post by: burnt mind on January 09, 2013, 07:58:20 pm
Thanks so much......that is the problme.....everythgiin is for the round top that i ahev found.. :smile:
Title: Re: Manuals manuals manuals
Post by: Creighton on January 09, 2013, 08:06:42 pm
ST's are fixable without much fuss. Read through the posts in the "Post 60's Machine" section.
Any questions just ask.
Creighton
Any questions just ask.
Creighton
Title: Re: Manuals manuals manuals
Post by: Creighton on January 10, 2013, 12:27:03 am
Tim be long gone from the board. I have no idea where my CD's may be. Tom may still have copies. They were not all that great to start with.
This thread is very old. Response will be limited.
Creighton
This thread is very old. Response will be limited.
Creighton
Title: Re: Manuals manuals manuals
Post by: WDG on March 14, 2016, 04:51:26 pm
Tim
Are the manuals still available?
WDG
Are the manuals still available?
WDG
Title: Re: Manuals manuals manuals
Post by: davethebirdman on March 14, 2016, 04:56:43 pm
Tim hasn't been around for a number of years i'm afraid