Title: Victor coke machine
Post by: on January 06, 2006, 11:52:28 am
Just wanted to say thanks to Eric at Global Compressor for saving me a ton of money! For lack of being able to find someone locally who works on Coke Machines, I called a commercial refrigeration guy out to look at my Victor machine. He said I needed a totally new compressor!
The help I got from Eric @ Global over the phone saved me from wasting $$$ on a unneeded compressor. I got all the parts I need from Global, now if I could only find someone local who know how to use them!!!!
Thanks again Eric!
The help I got from Eric @ Global over the phone saved me from wasting $$$ on a unneeded compressor. I got all the parts I need from Global, now if I could only find someone local who know how to use them!!!!
Thanks again Eric!
Title: Victor coke machine
Post by: Creighton on January 06, 2006, 02:20:24 pm
Welcome to the board!! Eric is the man. Where are you located? Someone may be able to suggest a tech.
Creighton
Creighton
Title: Victor coke machine
Post by: MoonDawg on January 06, 2006, 03:41:44 pm
What parts did he sell you? Maybe we can help you install them yourself?
Title: Victor coke machine
Post by: Yarochrehc on January 07, 2006, 12:11:37 pm
Welcome gardengirl,
soon you'll be hooked!
soon you'll be hooked!
Title: Victor coke machine
Post by: on January 12, 2006, 08:49:05 am
Thanks everyone!
I got a new wiring harness and a new thermostat from Eric (and I'm in north Georgia). My brother in law who has had some wiring experience in the Navy installed both.
This is a Victor CL-50A Machine.
The current problem seems to be that the fan in front of the compressor runs 24/7. I've had conflicting reports on whether than fan should run constantly. I'm getting some icing on top of the compressor as well as on the copper tubing. But the machine is now maintaining 35-40 degrees.
(FYI the machine is on a screened porch - if that has any bearing on anything.)
Anyway, if the fan isn't suppose to run, where can I get wiring instructions to get it corrected?
Thanks!
Judy
I got a new wiring harness and a new thermostat from Eric (and I'm in north Georgia). My brother in law who has had some wiring experience in the Navy installed both.
This is a Victor CL-50A Machine.
The current problem seems to be that the fan in front of the compressor runs 24/7. I've had conflicting reports on whether than fan should run constantly. I'm getting some icing on top of the compressor as well as on the copper tubing. But the machine is now maintaining 35-40 degrees.
(FYI the machine is on a screened porch - if that has any bearing on anything.)
Anyway, if the fan isn't suppose to run, where can I get wiring instructions to get it corrected?
Thanks!
Judy
Title: Victor coke machine
Post by: on January 12, 2006, 08:53:21 am
Hey Yarochrehc,
I also have a Vendo 63. The door isn't shutting snuggly (need some handle hardware) and the lock is missing the bottom nut (I think it fell in cap box and got thrown out). Know where I might be able to get parts? Local hardware store doesn't seem to carry the correct sizes.
Judy
I also have a Vendo 63. The door isn't shutting snuggly (need some handle hardware) and the lock is missing the bottom nut (I think it fell in cap box and got thrown out). Know where I might be able to get parts? Local hardware store doesn't seem to carry the correct sizes.
Judy
Title: Victor coke machine
Post by: MoonDawg on January 12, 2006, 11:33:43 am
Judy, make sure the wires from the lower fan motor go into the compressor and not directly to your junction box. From those same two terminals in the compressor, a pair of wires with a plug on the end goes into your new J- box.
This way compressor and fan shut off at the same time.
This way compressor and fan shut off at the same time.
Title: Victor coke machine
Post by: on January 12, 2006, 04:32:52 pm
Glen, let's see if I can explain (in my best layman terms) what I've got.
The compressor is a self contained unit and has a plug that is plugged directly into the junction box. The junction box has that plug, the compressor fan wires, another set of wires (which I'm assuming is the inside fan wiring) and another set (power?). Since the compressor is self contained, I don't think I can wire the compressor fan directly into the compressor can I?
The compressor is a self contained unit and has a plug that is plugged directly into the junction box. The junction box has that plug, the compressor fan wires, another set of wires (which I'm assuming is the inside fan wiring) and another set (power?). Since the compressor is self contained, I don't think I can wire the compressor fan directly into the compressor can I?
Title: Victor coke machine
Post by: on January 12, 2006, 09:31:29 pm
deleted
Title: Victor coke machine
Post by: on January 12, 2006, 09:41:22 pm
PS Glen, Here's a picture of what I'm trying to explain.
Title: Victor coke machine
Post by: globalcompressors on January 14, 2006, 10:39:33 am
What you have is a Tecumseh AJ series compressor. All of the electrical is inside that large lid on the front of the compressor. If you remove the cover and look on the back side, there is a wiring diagram showing the L1 and L2 leads (power in). Use the pig tail I sent, with the plug on the end, and wire it where the diagram shows. Also wire the fan motor, compressor side, in the same spot. If it is wired correctly, you should be able to plug the pig tail into an extension cord and the unit will fire up. When that works, now plug into the wiring block, I sent, and from there the compressor will fire up using the thermostat. Take care in reading the diagram. It really shouldn't be a major problem. 
Eric
Eric
Title: Victor coke machine
Post by: Yarochrehc on January 14, 2006, 04:26:43 pm
| Quote (gardengirl @ Jan. 12 2006,8:53) |
| I also have a Vendo 63. The door isn't shutting snuggly (need some handle hardware) and the lock is missing the bottom nut (I think it fell in cap box and got thrown out). Know where I might be able to get parts? Local hardware store doesn't seem to carry the correct sizes. Judy |
Hi Judy,
I probably have a spare nut for the lock that you can have.
If you can discribe the other parts you need, there are a few people parting out machines that might have what you want.
I'll PM you with information.
Bob
Title: Victor coke machine
Post by: Yarochrehc on January 14, 2006, 04:42:17 pm
Gardengirl, Vendobaldtops is parting out a V-63 machine.
Title: Victor coke machine
Post by: on March 15, 2006, 09:16:38 am
Well, I finally have gotten my Victor machine properly wired! The compressor fan now only runs when the compressor is on! 
I have an additional question though. Seems I have to keep the thermostat somewhere between 0 and 1 to keep the temperature between 38-45. It takes a lot of tweaking by gently bumping the thermostate up/down. The guy who did the wiring for me suggested that I get an enclosed thermostat and mount it at the bottom of the machine. Right now the it's mounted near the top of the machine and I had to drag the probe down toward the bottom.
Just wondered if it'd be worth it to try this!
I have an additional question though. Seems I have to keep the thermostat somewhere between 0 and 1 to keep the temperature between 38-45. It takes a lot of tweaking by gently bumping the thermostate up/down. The guy who did the wiring for me suggested that I get an enclosed thermostat and mount it at the bottom of the machine. Right now the it's mounted near the top of the machine and I had to drag the probe down toward the bottom.
Just wondered if it'd be worth it to try this!