Title: Id machine
Post by: on November 06, 2005, 08:08:42 pm
We have a chest cooler that we restored but couldn't find ID plate. Here are the particulars chest unit, embossed front and both folding top doors with double dot pepsi logo. Was a water cooler but changed it to ref. It also has some large louvers on the bottom completely across , about 4 also has external cap catcher. Any info will be helpful, thanks Patrick
Title: Id machine
Post by: aspbear on November 06, 2005, 10:07:46 pm
Sounds like a quikcold or maybe kelvinator but if you can post a picture someone can identify I bet.
Title: Id machine
Post by: lil bit on November 07, 2005, 11:01:05 pm
Got a late 40s 2 early 50s Coca Cola vending machine, Value?
Title: Id machine
Post by: BrianB on November 08, 2005, 07:00:39 am
Welcome to SMC, Lil' Bit & pjtaxi! Thanks for posting, it's good to see new faces around here. It would help greatly if you'd post some pictures along with a description.
Unfortunately, without pictures it's impossible to give even an approximate value. Even with a VERY detailed description (and no picture), it's still nearly impossible thus making pictures super-important.
Let's see some pic's!!!
Unfortunately, without pictures it's impossible to give even an approximate value. Even with a VERY detailed description (and no picture), it's still nearly impossible thus making pictures super-important.
Let's see some pic's!!!
Title: Id machine
Post by: Eric on November 08, 2005, 10:11:15 am
Since you guys are new... have you checked under soda machines on this home page?
pjtaxi that does sound like a Quikold or S & S cooler
lil bit depending on if it is a upright round corner or chest type look under Vendo
and if possible post images.....
And Welcome stick around you'll learn everything you'll ever want to
know about your machine and more....
Eric
pjtaxi that does sound like a Quikold or S & S cooler
lil bit depending on if it is a upright round corner or chest type look under Vendo
and if possible post images.....
And Welcome stick around you'll learn everything you'll ever want to
know about your machine and more....
Eric