|
Title: 3 machines Post by: Kevin C on October 29, 2005, 07:43:35 pm Hello
Today I was getting the V63 ready to take to my office as a can machine. (Soda's 50 cents) Well the V63 was not plugged in so I wanted to adjust the coinco coin mechanism from 25 cents to 50 cents. I put the coin mech in the V126 because the V126 is in operation in the garage. Well that coin mech would not work in the V126 with the quarters falling right through. OK I thought that coinco out of the V63 was belly up so I next took the coinco out of the VMC56, set it to 50 cents & stuck it in the V126 to check it. Well this coin mechanism also failed to operate. Now I was really pissed because everything was going wrong. So I set the coinco that was in the V126 to 50 cents, checked it(worked fine) & installed it in the V63. Now stay with me on this. So for some reason the two coinco coin mechanisms that were operational in the V63 & the VMC56 were not working. This just did not make any sense to me so I went back to step one. I installed the orginal coin mech from the V63 back in the V63 after I set it for 50 cents, I then plugged the machine in to the test extension cord. Wow I was stunned because it worked just fine set on 50 cents. I reinstalled the coin mechanism back in the VMC56 reset for 25 cents & it worked fine. Then I reinstalled the coin mechanism that started in the V126 back into the V126, set for 25 cents & it worked fine. My question is Why did the two coin mechanism that I moved into the V125 not work? Kind of strange. I guess I need to recheck all my spare coin mechanisms in a different machine. Any ideas? Kevin Title: 3 machines Post by: MoonDawg on October 30, 2005, 12:49:16 pm Does a V126 have a "Sold out" switch?
Title: 3 machines Post by: Kevin C on October 30, 2005, 08:55:38 pm Glen
I dont know. The V126 is full of drink & I even added nickles to the coin mechanisms. Where is the sold out switch? Kevin |