|
Title: Coin mechanism replacement Post by: on August 22, 2002, 01:19:06 pm I have a La Crosse 7-up machine with a National Coin Rejectors, Inc. mechanism (model 8039) in it.
The machine (see picture attached) takes 10 cents in one dime or two nickels and I would like to increase the price to increments of 25 cents. Does anyone know a you have a mechanism which will fit this machine. All of the newer coin validators I have seen are too small. Title: Coin mechanism replacement Post by: Jim on August 23, 2002, 03:30:36 pm Brent,
Most 9 pin coin mech are interchangeable, so if you locate an older one, say a Coinco 9800 series, it should work fine and you could change the price accordingly. Most of these older mechs range in price from .05 - .75 If this isn't enough, then you'll have to locate a newer one that does to $1.50... |