Title: Syrup dispenser
Post by: on October 04, 2005, 07:03:23 pm
hey guys, was fortunate enough to get a multiples dispenser.From what i can see its model # 71-5 serial # 326.....am curious wheer i can get any helpful info and/or repair manual, pictures etc. the unit is basically square with a two piece lid top hlf of main body is white bottom half is red has decal that says Drink coke.......any info on operation authenticity etc would be appreciated.
Thanks much in advance:
Bruce
Thanks much in advance:
Bruce
Title: Syrup dispenser
Post by: Ltransam on October 04, 2005, 08:06:19 pm
Hi,Bruce
Welcome to the Family
If you could post Pictures of the dispenser it would be helpful to ID It. Also if you look in the Dispenser area on the home page there are some Pictures & Info there .This Group ALLWAYS Request Pictures
Ltransam A.K.A Ltransam
Welcome to the Family
If you could post Pictures of the dispenser it would be helpful to ID It. Also if you look in the Dispenser area on the home page there are some Pictures & Info there .This Group ALLWAYS Request Pictures Ltransam A.K.A Ltransam
Title: Syrup dispenser
Post by: racerx45 on October 05, 2005, 12:44:25 am
Hi Bruce,
I saw the dispenser you are talking about on eBay. I have a Dr. Pepper version. I have also seen it in Pepsi logos. The only thing with the Coke one is with out the original end panels it’s hard to say if it was originally Coke or not. Here is a picture of the one I have.
Please post a few pictures of your dispenser, I would really like to know if it was a Coke dispenser from the factory or not.
As for getting it working it is just a basic post mix dispenser. You have a water hook up and a syrup tank and everything is ice cooled. So if the valve is working and you have a carbonated water source you should be good to go. If it is missing parts or the valve needs work things get hard from there. There aren't any sources for parts and I have not come across a manual for the value used on this dispenser.
I saw the dispenser you are talking about on eBay. I have a Dr. Pepper version. I have also seen it in Pepsi logos. The only thing with the Coke one is with out the original end panels it’s hard to say if it was originally Coke or not. Here is a picture of the one I have.
Please post a few pictures of your dispenser, I would really like to know if it was a Coke dispenser from the factory or not.
As for getting it working it is just a basic post mix dispenser. You have a water hook up and a syrup tank and everything is ice cooled. So if the valve is working and you have a carbonated water source you should be good to go. If it is missing parts or the valve needs work things get hard from there. There aren't any sources for parts and I have not come across a manual for the value used on this dispenser.
Title: Syrup dispenser
Post by: Ltransam on October 05, 2005, 06:56:38 am
Hi,Bruce
Check out ALL
Racerx45 Dispenser's He's the man in this area ....
Also welcome back Steve (Racerx45) Notice you have not been around lately.
Also Steve I never got pictures & Dimensions of the Galxie drip tray .
Ltransam
Check out ALL
Racerx45 Dispenser's He's the man in this area .... Also welcome back Steve (Racerx45) Notice you have not been around lately.
Also Steve I never got pictures & Dimensions of the Galxie drip tray .
Ltransam
Title: Syrup dispenser
Post by: on October 05, 2005, 06:37:47 pm
Hey guys: thnaks all for your rapid response: Yes racer that is the exact dispenser i got. Will post soem pics as soon as possible: So guess i really can't test unit til everyhthign hooked up. I do know the rear panel light asembly is missing. If anyoen can lead me in a direction for that would be much appreciated.
again thanks
Bruce
again thanks
Bruce