|
Title: Bottle rack Post by: Kevin C on August 16, 2005, 10:32:53 am Hello
My ebay purchased empty bottle rack arrived yesterday. The rack is about 3 to 4 feet tall. The top of the rack has two metal extensions with loops. So do you drilling into the top of the machine & hang the rack? Now my V-126 the machine I bought the rack for has about 6 holes down the left side of the machine from an old bottle rack. Of course these holes do not line up with the new rack I guess I am looking for ideas beside putting another hole in the top of the machine. Kevin Title: Bottle rack Post by: Kevin C on August 17, 2005, 11:07:08 am Hello
I guess from the lack of response that I will need to place two hooks in the top of the V-126 to hold the empty bottle rack in place. Kevin Title: Bottle rack Post by: MoonDawg on August 17, 2005, 11:38:36 am Kevin, why not cut the loops off? You don't want any more holes in your machine do you?
I hang my empties rack on the wall next to my machine. Terry, I got six of these racks back from powdercoating if you still need one. Title: Bottle rack Post by: Kevin C on August 17, 2005, 02:10:22 pm Moondawg
Now that is an idea I need to look at. If I cut the loops off will the metal studs fit the existing holes in the side of the machine or just mount it to the wall & be done with it. Thanks Kevin Title: Bottle rack Post by: on August 17, 2005, 02:50:01 pm I like the idea of the wall mount or using the existing holes. I hate to put extra holes in my machines.
|