Title: Vendo
Post by: on July 22, 2002, 10:16:21 pm
Need info on a Vendo Model# Ha110B need year made and Value... Thanks Misti
Title: Vendo
Post by: johnieG on July 23, 2002, 03:57:55 pm
Ok!!! pictures helps a lot!!! Looks like a mid60's model (due to the wood grain vinyl) looks like it was made to vend 12oz. cans (little pull tabs on the bottle gates) probably could handle bottles too 10 oz. or less) my personel option on worth is only base on what I'd pay for it, which is around $200-300
depending if it's complete, working, no hugh dents, scratches,etc. anybody else care to venture a price-range?
hope this helps...JohnieG
depending if it's complete, working, no hugh dents, scratches,etc. anybody else care to venture a price-range?
hope this helps...JohnieG
Title: Vendo
Post by: Pat Pixley on July 24, 2002, 05:52:40 pm
I Would say 1964 or 1965 looks alot like v110
and as far as a value I would have to say the same thing
Any major dents or rust does every thing work
and is every thing there .
Need to see a photo of the whole machine to give you a better idea on the value.
Pat P.
and as far as a value I would have to say the same thing
Any major dents or rust does every thing work
and is every thing there .
Need to see a photo of the whole machine to give you a better idea on the value.
Pat P.
Title: Vendo
Post by: on July 26, 2002, 12:21:45 am
No major dents, or scratches, works great. I'll try to get a better picture. As far as I can tell everthing is still there that was orginal. Little bit of rust inside the machine. It does despence cans, but I think it was set up for bottles at one time. The price is still 45 cents. Thanks for the Info.. Misti 
Title: Vendo
Post by: on July 27, 2002, 11:45:40 pm
Looks like a Vendo 110 and being that's it's a square top, the value is relatively low. You can pick up machines like this and SMALLER, for less than $150. Cosmetically, it's not a very striking machine, so I would convey to you that demand would be low.
If it has personal value, keep it, if not, sell it for a cheap price on Ebay.
Steve
If you want to see a smaller refurbished square top, look at my Mountain Dew Machine.
Title: Vendo
Post by: Pat Pixley on August 03, 2002, 11:20:37 pm
Well I had a Vendo V110 that I restored Ran it for a year or two then this year I just sold it for $500 . It was good machine there is always some one looking for something like that , And if they want it bad they will pay for it.
So just dont let it go for $150 do some work on it use it
then sell it . If you don't want to do any work
on it then sell it but start at $200 and see if you get any
bits .
Pat P.
So just dont let it go for $150 do some work on it use it
then sell it . If you don't want to do any work
on it then sell it but start at $200 and see if you get any
bits .
Pat P.