Title: Tamper resistant screws
Post by: on July 19, 2002, 01:04:53 pm
Anybody know where to get a screwdriver or bit to remove the tamper resistant screws on a 60's vendorlator machine? kind of a rectangular hole with a slight radius on the ends.
Title: Tamper resistant screws
Post by: Jim on July 19, 2002, 06:37:08 pm
It's called a Clutch Bit and they come in different sizes.
Usually you can find these at a decent hardware store or possibly Home Depot/Lowes...
Usually you can find these at a decent hardware store or possibly Home Depot/Lowes...
Title: Tamper resistant screws
Post by: johnieG on July 19, 2002, 08:53:44 pm
Jim's correct, you can find them at Sear's hardware too, I got my set (all three size's) at my local electrical suppier, say is anybody stocking these little buggers? (the clutch-head screw's) I've been using stainless steel philips to replace them for now, just hoping sombody still makes 'em, so if you know of any supplier please post them!!!
Title: Tamper resistant screws
Post by: Pat Pixley on July 19, 2002, 11:05:56 pm
Both Jim & johnie are right I got my set at a True Value
hardware . Home Depot also has them and Ace has them.
Pat P.
hardware . Home Depot also has them and Ace has them.
Pat P.