Title: Cavalier cs80-e parts needed
Post by: on July 18, 2002, 03:24:58 pm
I have a Cavaluer CS80-E and the only problem with it is its missing the Electric Sign parts...not the cover of the sign that says "Coca-Cola" but the parts that go behind it such as the fluorecent lamp and all the parts that go with it. I have tried funtronics but he could not help me with those parts 
If any one has these parts or knows where i could get them please reply.
Thank You for your help
If any one has these parts or knows where i could get them please reply.Thank You for your help
Title: Cavalier cs80-e parts needed
Post by: johnieG on July 18, 2002, 08:49:04 pm
what is the size (height x width) of your sign? and was it originally a light-up? with the wiring harness in place for the fluorecent light? I can probably come up with enough parts (lamp sockets, ballast, etc.) if it's already pre-wired for an electric sign... let me know ...JohnieG
Title: Cavalier cs80-e parts needed
Post by: on July 18, 2002, 10:20:28 pm
Thanks for the reply From what I can tell my machine was wired for an electric sign. to help i have a few pics:
This is what is behind the sign:
This is a close up of the connection that is there:
Hope you can help me out.....i will post the height and width tommorow.
Thank you again
This is what is behind the sign:
This is a close up of the connection that is there:
Hope you can help me out.....i will post the height and width tommorow.
Thank you again
Title: Cavalier cs80-e parts needed
Post by: Pat Pixley on July 18, 2002, 11:47:12 pm
Johnie G
Would a Cav. cs 64 work those two machines shared some
parts. the width is the same and the depth is to.
Pat P.
Would a Cav. cs 64 work those two machines shared some
parts. the width is the same and the depth is to.
Pat P.
Title: Cavalier cs80-e parts needed
Post by: on July 18, 2002, 11:51:16 pm
I think the parts from a Cav. cs 64 would work....but i dont know where i could find those parts either...Do you have any ideas???
Thanks again
Thanks again
Title: Cavalier cs80-e parts needed
Post by: Pat Pixley on July 19, 2002, 12:11:34 am
ok i was going to say look in the classfied area but I dont
see any there . Maybe try running a listing here maybe that will help. Or someone will see this and have this part.
Pat P.
see any there . Maybe try running a listing here maybe that will help. Or someone will see this and have this part.
Pat P.
Title: Cavalier cs80-e parts needed
Post by: johnieG on July 19, 2002, 06:40:59 am
the lamp/ballast assembly and wiring harness off of a c64 will fit. but I'm not sure about the inside frame (I'm assuming you already have the outside frame & sign), but you can transfer the lamp sockets, ballast, and wiring to a piece of sheet metal cut to fit,(painted flat white) and attach to the machine, then reinstall the sign/frame assy. this is how I usally get around the missing electric's/light problem the toughest part is matching the "plug" that goes into the machines socket/harness.