Title: What is this part?
Post by: on May 09, 2005, 09:01:43 am
Title: What is this part?
Post by: on May 09, 2005, 10:14:06 am
lrvman, welcome to the SMC forums. Good to have you here.
I would love to ID that part, but I have no idea. but someone here will.
I would love to ID that part, but I have no idea. but someone here will.
Title: What is this part?
Post by: on May 09, 2005, 10:28:28 am
There were about 7 of those stacked in the condensor drip pan. Seller did not know anything about them.
Title: What is this part?
Post by: MoonDawg on May 09, 2005, 10:55:25 am
The fact that there are 7 of these with slots in them, would lead one to suspect that they are spacers for your vending stacks.
Title: What is this part?
Post by: on May 09, 2005, 11:32:21 am
Here is a link to some pics of the machine...Maybe by looking at them you can figure out where those parts go..I'm stumped.
Soda Machine Pictures
Soda Machine Pictures
Title: What is this part?
Post by: BryanH on May 09, 2005, 11:24:25 pm
Irvman - How about some dimensions for the mystery part?
Title: What is this part?
Post by: dr galaga on May 10, 2005, 07:55:36 pm
This may be a long shot- except for the slits,it almost looks like a cash box lid of some sort - maybe from some old electromechanical game. Attached is the shape of a 1970 Williams pinball machine cash box.
Title: What is this part?
Post by: dr galaga on May 10, 2005, 07:56:44 pm
Most lids end up missing. I actually still have the one in my Atari Asteroids machine.
Title: What is this part?
Post by: on May 11, 2005, 12:24:41 am
Choice Vend calls them "Side Fillers"for use with different size bottles. They hang on the side inside the vending rack to compensate for the smaller diameter of bottles than cans. You adjust the back spacer for single depth (due to the longer length in bottles than cans) and remove the 2 rear Helixes (You use all 4 Helixes for 2 deep cans vending)
A necessity for vending 12oz beer bottles plus you can vend 12oz cans and bottles in the same machine
URL shows a picture in manual Side Filler
Hope that helps
A necessity for vending 12oz beer bottles plus you can vend 12oz cans and bottles in the same machine
URL shows a picture in manual Side Filler
Hope that helps
Title: What is this part?
Post by: Creighton on May 11, 2005, 12:55:08 am
Hello commercevending,
Thanks for the information. Not sure if you have been properly Howdy's for the board but welcome and thanks again.
Creighton
Thanks for the information. Not sure if you have been properly Howdy's for the board but welcome and thanks again.
Creighton
Title: What is this part?
Post by: on May 11, 2005, 09:16:36 am
Good guess though Dr.G.
Title: What is this part?
Post by: on May 17, 2005, 09:47:58 am
Since I do not use 10 oz cans, I guess they are like an appendix...Not needed. Whew! My CVC-374 does not dispense bottles, so I won't need em for that.
Thanks!
Thanks!
Title: What is this part?
Post by: on May 18, 2005, 12:05:04 am
| Quote (commercevending @ May 11 2005,1:24) |
| Choice Vend calls them "Side Fillers"for use with different size bottles. They hang on the side inside the vending rack to compensate for the smaller diameter of bottles than cans. You adjust the back spacer for single depth (due to the longer length in bottles than cans) and remove the 2 rear Helixes (You use all 4 Helixes for 2 deep cans vending) A necessity for vending 12oz beer bottles plus you can vend 12oz cans and bottles in the same machine URL shows a picture in manual Side Filler Hope that helps |
Hi, just got my first machine a Vendo V220/125-5 Model. And i have been looking for the side spacers so i can fit 12oz bottles in the machine. From your massage it looks as if you know were i can find some. Any leads, thanks for your time.
Title: What is this part?
Post by: on May 18, 2005, 02:45:56 am
Hey toro,
Welcome to the group. Great to have you here and that's no bull.
Welcome to the group. Great to have you here and that's no bull.