SMC Discussion Areas

Soda Machines, Coolers & Dispensers => Post 60's Machines & Coolers => Topic started by: on April 28, 2005, 11:25:31 am



Title: Getting stuck..
Post by: on April 28, 2005, 11:25:31 am
Hello, can someone help me out!  Some of the latches on my VF-56 are getting stuck after I pull a bottle out..  I have to wiggle them and finally it will slide and allow another bottle to come into place..  What should I do?  I was thinking WD-40 to lubricate it..

Any comments are welcome!

Also, anybody have luck finding a a Coin bezel for my VF-56?

Thanks
Gilbert


Title: Getting stuck..
Post by: vendobaldtops on April 28, 2005, 10:04:29 pm
Yep...WD 40 it....


Title: Getting stuck..
Post by: dr galaga on April 28, 2005, 10:20:34 pm
Try some oil and grease and this http://soda-machines.com/cgi-loc....;t=1440


Title: Getting stuck..
Post by: Kevin C on April 29, 2005, 08:47:56 am
Hello

Take the shelves out & then remove the two screws that hold the bottle rack in place. Remove the bottle rack to clean & lube. Be careful because the rack is heavy.

Kevin