|
Title: Coils for National Rejectors Coin Mech 8-56-007 B Post by: meSz on February 21, 2025, 04:23:13 pm Looking for replacement coils for a National Rejectors Coin mech 8-56-007 B. Need two of them. I know a lot of people don't fix these and just upgrade to the Mars or Coinco but I'd like to try and see if replacing these two coils will fix the original. It was working till the one coil just fell apart.
Anyone can advise as to a replacement for these coils, appreciate it! Title: Re: Coils for National Rejectors Coin Mech 8-56-007 B Post by: johnieG on March 08, 2025, 12:06:00 pm Although you can replace them with parts from a donor unit, technically the CREMS coils aren't really needed for home use, you can remove the coils completely & insulate the ends of the removed wires with heat-shrink to prevent shorting & the mech will work just fine without them. I just did this tech-mod with a Coinco S75-9800/b model of a customers Cavalier CS80 where the CREMS fingers were damaged by an over-enthusiastic mr fix-all, I removed the coils, heat shrunk the wires & secured them out of the way with sticky tie wrap mounting pads...works fine.
|