Title: Anyone need vendo 63 parts?
Post by: Bob K on April 27, 2005, 11:28:08 am
I picked up a Vendo H63 last night. Very solid complete machine, but suffered some damage due to a break-in 
I'm thinking of parting it out. Is anybody in need of anything if I decide to go that route?
I haven't fired it up since I transported it on its back, but reefer, bottle door, stack, shelves, liner, gasket, etc. all look really nice.
Bob
I'm thinking of parting it out. Is anybody in need of anything if I decide to go that route?
I haven't fired it up since I transported it on its back, but reefer, bottle door, stack, shelves, liner, gasket, etc. all look really nice.
Bob
Title: Anyone need vendo 63 parts?
Post by: dr galaga on April 27, 2005, 07:18:13 pm
What kind of sign does it have and what shape is it in?
I am also interested in the round piece that the lock screws in to (that spins to move the locking bars) - see attached pic.
I am also interested in the round piece that the lock screws in to (that spins to move the locking bars) - see attached pic.
Title: Anyone need vendo 63 parts?
Post by: Bob K on April 27, 2005, 08:26:52 pm
dr G,
It's the metal sign, not a light-up.
I'll look at the lock piece.
Bob
It's the metal sign, not a light-up.
I'll look at the lock piece.
Bob
Title: Anyone need vendo 63 parts?
Post by: joesquid on April 29, 2005, 11:59:06 pm
Bob,
Have you still got the cap catcher and bottle opener bezel, and coin return bezel?
Thanks!
Have you still got the cap catcher and bottle opener bezel, and coin return bezel?
Thanks!
Title: Anyone need vendo 63 parts?
Post by: joesquid on April 30, 2005, 12:01:04 am
Bob,
One other thing. Do the chrome-like moulding pieces on the main door come off and are yours in decent shape?
One other thing. Do the chrome-like moulding pieces on the main door come off and are yours in decent shape?
Title: Anyone need vendo 63 parts?
Post by: Bob K on May 02, 2005, 07:53:58 am
joesquid, it has the capcatcher and coin return bezel, but the opener bezel is crunched. Strangely enough, it does not have metal trim around the front - nor does it look like it ever did. Must have been a budget model 
Dr G., it does have the lock piece in your illustration.
Bob
Dr G., it does have the lock piece in your illustration.
Bob
Title: Anyone need vendo 63 parts?
Post by: joesquid on May 02, 2005, 10:01:09 am
Bob,
How much do you want for the cap catcher and coin return bezel?
How much do you want for the cap catcher and coin return bezel?
Title: Anyone need vendo 63 parts?
Post by: BryanH on May 12, 2005, 04:30:43 pm
Eric - don't know if you still need the CR bezel. If you do there's one on ebay. I bought the same on for my vmc56 and it was in great shape (NOS).
Title: Anyone need vendo 63 parts?
Post by: jasmine64 on May 12, 2005, 05:41:35 pm
Does your machine have the 9 pin female jones plug that the coin mech plugs into?
I can use one.
I can use one.
Title: Anyone need vendo 63 parts?
Post by: dr galaga on May 12, 2005, 09:18:59 pm
Thanks Bob, I got the part today. I key all of my gameroom items the same, but the hole that is used in the piece that Bob sent me is too small for modern cam locks. I wanted to keep the original one with the original lock, sooooo I filed the hole bigger in the one that I got today (didn't have any Dremel bits that were small enough).
My Vendo is now keyed the same as my games!
My Vendo is now keyed the same as my games!
Title: Anyone need vendo 63 parts?
Post by: Bob K on May 12, 2005, 10:43:54 pm
Pretty cool, Dr. G - one key fits all! Glad the part worked out.
Bob
Bob
Title: Anyone need vendo 63 parts?
Post by: Bob K on May 12, 2005, 10:45:21 pm
Jasmine, I believe so. I'll check and post back here tomorrow.
Title: Anyone need vendo 63 parts?
Post by: Kevin C on May 17, 2005, 08:35:22 am
Hello
Do you have glass bottle door?
Kevin
Do you have glass bottle door?
Kevin
Title: Anyone need vendo 63 parts?
Post by: Bob K on May 17, 2005, 10:58:08 am
Kevin, I do have the door and it's in excellent shape. You can email me at keenan58@aol.com if you want it.
Bob
Bob
Title: Anyone need vendo 63 parts?
Post by: BryanH on May 17, 2005, 12:43:45 pm
Bob - I fell asleep at the switch. I have a VF56 which I think is very similar (if not identical) to your V63. I think I could use a couple of your shelves plus a bunch of stuff listed here.
Title: Anyone need vendo 63 parts?
Post by: Bob K on May 22, 2005, 10:50:45 am
Bryan - sorry for the delay in responding. Here's the style shelf:
As you can see, length from end to hook is around 20.5"
Shortest length is around 15.25"
Width tapers from 6.5 to maybe a little less than 6.25"
Let me know if these might do the trick.
Bob
As you can see, length from end to hook is around 20.5"
Shortest length is around 15.25"
Width tapers from 6.5 to maybe a little less than 6.25"
Let me know if these might do the trick.
Bob
Title: Anyone need vendo 63 parts?
Post by: BryanH on May 22, 2005, 12:04:09 pm
Thanks Bob - The shelf looks identical to mine but it's 1.5" longer. My machine is still in pieces so I can't even take a look to see how hard (or impossible) it would be to accomodate the extra length. Really appreciate your checking but I think I'd better pass for now and file it away as something to check when I start to put the machine back together.
Title: Anyone need vendo 63 parts?
Post by: Bob K on May 22, 2005, 12:07:13 pm
You know where to find me... 
Bob
Bob
Title: Anyone need vendo 63 parts?
Post by: Kevin C on May 23, 2005, 09:28:07 am
Bob
Do you still have the coin door? I just bought a V126 with a bent coin door. When I get the new machine home I will get the measurements.
Kevin
Do you still have the coin door? I just bought a V126 with a bent coin door. When I get the new machine home I will get the measurements.
Kevin
Title: Anyone need vendo 63 parts?
Post by: Bob K on May 23, 2005, 11:00:34 am
Kevin, the coin door was mangled when it was vandalized, along with the coin entry panel.
Bob
Bob
Title: Anyone need vendo 63 parts?
Post by: on May 23, 2005, 11:23:52 am
Will the coin entry bezel fit on to a VF-56 square top machine?
Title: Anyone need vendo 63 parts?
Post by: Kevin C on May 28, 2005, 03:21:26 pm
Bob
Do you have the lower fan motor bracket?
Kevin
Do you have the lower fan motor bracket?
Kevin
Title: Anyone need vendo 63 parts?
Post by: Bob K on May 29, 2005, 08:14:16 pm
Gsaens, the coin entry bezel is toast. Looks like someone tried to pry it open with a crow bar.
Kevin, I believe the entire cooling unit is there and functioning. I plugged it for a while and the lines got cold. I'll check the fan bracket tomorrow (Monday).
Bob
Kevin, I believe the entire cooling unit is there and functioning. I plugged it for a while and the lines got cold. I'll check the fan bracket tomorrow (Monday).
Bob
Title: Anyone need vendo 63 parts?
Post by: Bob K on May 29, 2005, 08:15:45 pm
Gsaens, the coin entry bezel is toast. Looks like someone tried to pry it open with a crow bar.
Kevin, I believe the entire cooling unit is there and functioning. I plugged it for a while and the lines got cold. I'll check the fan bracket tomorrow (Monday).
Bob
Kevin, I believe the entire cooling unit is there and functioning. I plugged it for a while and the lines got cold. I'll check the fan bracket tomorrow (Monday).
Bob
Title: Anyone need vendo 63 parts?
Post by: Kevin C on May 30, 2005, 08:28:10 am
Bob
I am just looking for the lower condensor fan bracket.
Let me know
kevin
I am just looking for the lower condensor fan bracket.
Let me know
kevin
Title: Anyone need vendo 63 parts?
Post by: Bob K on May 31, 2005, 08:06:24 pm
Kevin, the fan bracket is there. I just don't know when I'm going to get the time to pull the deck out to get access to it. I don't want to hold you up.
Unless I can get it out without removing the deck?
Bob
Unless I can get it out without removing the deck?
Bob
Title: Anyone need vendo 63 parts?
Post by: Kevin C on June 01, 2005, 10:11:24 am
Bob
Thanks for the reply but I did not want to take parts off a good cooling system. I just ordered one from Soda Jerk.
Maybe we will be able to work something.
Kevin
Thanks for the reply but I did not want to take parts off a good cooling system. I just ordered one from Soda Jerk.
Maybe we will be able to work something.
Kevin