|
Title: Westinghouse WB - 60 sign Post by: Justin W on March 08, 2024, 09:18:15 pm Fixing up a Westinghouse WB-60 that has a broken sign. I was going to try to make another insert on my own with some plexiglass and translucent sign vinyl using my Cricut vinyl machine. Has any tried using sign vinyl to recreate one of these back lit signs?
Also does anyone have a service manual for the wb-60 or other similar select o matic westinghouse machines? Justin Title: Re: Westinghouse WB - 60 sign Post by: Jim on March 09, 2024, 04:44:52 pm Hello Justin,
The only problem I foresee is your cricut vinyl does not come in a "reverse apply" form, meaning, you apply the decal/vinyl to the back of the plexiglass. A work around may be to utilize two 1/8" thickness pieces of plexiglass and apply to the front of one and sandwich the artwork between the two... I do not have a service manual for this model to offer you. Good luck on the project! Jim Title: Re: Westinghouse WB - 60 sign Post by: Justin W on March 10, 2024, 06:12:33 pm I thought the same about the mirroring of the regular sign vinyl so I googled some translucent vinyl and ordered it. I also thought regular opaque vinyl would maybe look weird when backlit on the machine. The original sign allows light through. I cant tell if they used decals or screen printing or what they did on the original signs. We’ll see how this turns out after I put a sign together and I’ll post pics if it works out.
After this little project Im gonna start refurbishing the internals and cooling system. It all works but it needs some tlc. If I run into more issues I’ll post again in another area. Thanks! |