|
Title: Coke bottle size/Vendo 81 bottle slide questions Post by: sdebol on February 19, 2019, 08:23:49 pm Hello:
I'm currently using the little 8 oz Coke/Sprite/Diet Coke bottles in my Vendo 81 but they don't work as well as the larger 12 oz bottles I have for other flavors. Do you all find the bottle slide guides on the shelves help with these small bottles? I have all the parts for the slide guides but they weren't installed when I obtained the machine and I never put them on. Also, I did find larger Coke bottles (I think they are Mexican Coke bottles) but they turned out to be a little too long to roll into place after vending a bottle. It seems like lots of people describe their use on the forums but I don't think there's anything left more to adjust on my shelves (already in largest settings). Any comments? Thanks! Title: Re: Coke bottle size/Vendo 81 bottle slide questions Post by: johnieG on February 19, 2019, 09:50:06 pm Hello & welcome to the site...
I’ve used the small/8-oz. size Coke bottles with no problems in Vendo V81’s with the reproduced shelves without the sliders, you just have to adjust the shelf forward enough so that the crown of the bottle clears the edge of the gate/portal. The only time I’ve run into vending problems on customers V 81’s & 56’s is when the shelf isn’t seating on the edge of it’s matching port. Or the machine isn’t level & plumb. It’s a gravity fed machine so there’s little to go wrong, unless a shelf is warped or something twisted with the ports floor itself. BTW where did you get the Oso grape? Title: Re: Coke bottle size/Vendo 81 bottle slide questions Post by: sdebol on February 20, 2019, 12:23:44 am Hello & welcome to the site... I’ve used the small/8-oz. size Coke bottles with no problems in Vendo V81’s with the reproduced shelves without the sliders, you just have to adjust the shelf forward enough so that the crown of the bottle clears the edge of the gate/portal. The only time I’ve run into vending problems on customers V 81’s & 56’s is when the shelf isn’t seating on the edge of it’s matching port. Or the machine isn’t level & plumb. It’s a gravity fed machine so there’s little to go wrong, unless a shelf is warped or something twisted with the ports floor itself. BTW where did you get the Oso grape? Thanks for the welcome!—so happy to have access to all this info and expertise! I have the shelves adjusted forward and seated properly. Will check the level of the machine. Even though they are small bottles, I notice the bottom of the bottle kind of catches as I pull it out—even though bigger ones do not. Any idea what this means? I live in the Minneapolis area and buy the Oso grape (and other craft sodas) at Lunds/Byerlys grocery stores in the area. Title: Re: Coke bottle size/Vendo 81 bottle slide questions Post by: sdebol on February 20, 2019, 12:26:08 am Also—is there any advantage to the reproduction shelves over original shelves if I’m not using the sliders?
Title: Re: Coke bottle size/Vendo 81 bottle slide questions Post by: johnieG on February 20, 2019, 01:15:06 pm Shelves are shelves, most prefer the original style. Functionally they are identical,
You could try to adjust the bottle gate opening ( raise or lower the floor/vending shelf of the port.) |