SMC Discussion Areas

Trouble-Shooting => Coin Mechanisms => Topic started by: on April 19, 2005, 02:03:35 pm



Title: Mars trc 6800 coin changer switches
Post by: on April 19, 2005, 02:03:35 pm
I've searched for my answer but can't find it anywhere :down:  I'd like to set this up for free vend all the time. Is it possible without adding an additional switch?


Thanks
Bill


Title: Mars trc 6800 coin changer switches
Post by: johnieG on April 19, 2005, 08:28:30 pm
Well it's a good news/bad news kind of an answer...

The good news is that the MARS 6800/6XXX series can be programed to accept U.S./Canadian coins including the
Susan-Be-Ugly or the new Golden Dollar coin dollar and/or a token, (in use with Dollar coin acceptance or in lieu of a Dollar coin(s)). I've just gone through a bunch for MoonDawg, :)

The bad news is , no I see no way to program it for a built-in "Free-play", so you're either going to have to use it as a coinmech/changer ( setting the vend-price to whatever you desire) or use the external "free-play" switch with or without the coinmech. in place.  :(

On the 6800 series standard 8-pin "Jones" connector, the pin-out is the same as for the Coinco mechs' putting the momenary switch between pins #1 & #3 the vending price on a 6800 series can be set from 5-cents to $10.00


Title: Mars trc 6800 coin changer switches
Post by: on April 20, 2005, 09:23:01 am
Thanks JohnieG :D

I had guessed that would be the case and made a switch for it last night. It works goood and dispenses drinks now.


Title: Mars trc 6800 coin changer switches
Post by: MoonDawg on April 20, 2005, 10:33:42 am
6800 series can be set to vend at .05 to $10.00 ? :oh:

    What would sell at $10.00?  Little bottles of champagne?