|
Title: Mars TRC-6800H problem Post by: bluebluejays on March 08, 2018, 11:02:45 am Looking at buying a machine with this coin mech.
Coins pass through without registering a vend. Can you describe the evaluation steps I should look at to correct problem. My email is bluebluejays@aol.com if someone can send me a download manual as well. Thanks for you help. Ken Title: Re: Mars TRC-6800H problem Post by: Ryengoth on April 28, 2018, 09:57:41 pm Diagnosing is a bit more difficult than that. For one, the relay on the machine affects power being passed to, through and from the coin mech. Additionally, the settings on the unit affect the overall behavior of the coin mech operation. I would start with posting a pic or listing the state of the switch and price DIP switches behind the sensor plate. The two ears sticking forward on the top corners can be pressed and the coin head will tilt away.
TRC-6800 Install/Config Guide https://www.dropbox.com/s/xgtoze4c41temyu/Mech-TRC6800H.pdf?dl=0 (https://www.dropbox.com/s/xgtoze4c41temyu/Mech-TRC6800H.pdf?dl=0) |