|
Title: Stoner candy 9 pull Post by: boxhead on October 17, 2017, 06:10:43 am Hi guys,
Finally getting back to working on my stoner 9 pull. I have unfortunately lost all the pictures i took when pulling down all the mech assemblies. I assume the 8 pulls etc are the same but the 9 has an extra slot, would any one be able to help me out and take a heap of close up pics of theirs to help me put it back together? I dont need them straight away as i still have work to do but would really appreciate it if someone could help me out. Or point me to some pictures somewhere. Cheers Corey Title: Re: Stoner candy 9 pull Post by: Jim on October 17, 2017, 11:23:54 am Corey,
When you say mech assemblies, did you dis-assemble everything...? Title: Re: Stoner candy 9 pull Post by: boxhead on October 17, 2017, 01:49:18 pm Hi Jim,
Yeah i pulled it all down to clean and paint etc. I did not pull parts apart that were riveted etc. I also did not pull the actual coin mech apart either. More so about all the pull slide assembly and linkages etc Cheers Corey Title: Re: Stoner candy 9 pull Post by: boxhead on October 18, 2017, 07:03:01 pm Hi Guys,
Is anyone able to help? Cheers Corey Title: Re: Stoner candy 9 pull Post by: Jim on October 18, 2017, 07:59:57 pm Corey,
Call me tomorrow at your convenience... 772*834*3271 Title: Re: Stoner candy 9 pull Post by: boxhead on October 18, 2017, 10:10:23 pm Hi Jim,
Which state do you live in as i am in Australia and will need to work out the time difference if i am to call you. Cheers Corey Title: Re: Stoner candy 9 pull Post by: davethebirdman on October 19, 2017, 12:46:53 am He's on the East Coast, Florida... Title: Re: Stoner candy 9 pull Post by: boxhead on October 19, 2017, 02:58:14 am Thanks mate.
|