|
Title: The clip holding on the (bottle door) light cover on an 81D Post by: Bruce on October 31, 2015, 11:34:48 am Any tips on how I can remove it so I can get access to the light?
I've searched, saw a post saying "remove clip, slide up light cover *carefully*, (it's glass!) then .... But the first part is stumping me. I don't want to muscle it out, but how to remove it properly is escaping me at the moment. Thank you Bruce Title: Re: The clip holding on the (bottle door) light cover on an 81D Post by: Jim on October 31, 2015, 11:48:25 am Once you slide the glass upward, push ever so slightly along the top while getting the bottom edge of the glass with your finger to slide out.
Title: Re: The clip holding on the (bottle door) light cover on an 81D Post by: MoonDawg on October 31, 2015, 01:16:05 pm The clip is held in place by one screw under the gasket and one inside, on the door liner.
Title: Re: The clip holding on the (bottle door) light cover on an 81D Post by: Bruce on November 01, 2015, 12:47:03 am Once you slide the glass upward, push ever so slightly along the top while getting the bottom edge of the glass with your finger to slide out. Will do Jim, when I get there! The clip is held in place by one screw under the gasket and one inside, on the door liner. Thank you Moondawg! That was the hold up. |