|
Title: Looking for National Candy Vending parts Post by: brmorr on August 10, 2015, 05:45:18 pm Looking for some cosmetic pieces on the front of the machine as well as maybe the mirror.
Let me know what you have or where I can get some. Hopefully someone is parting one out!!! Title: Re: Looking for National Candy Vending parts Post by: Jim on August 10, 2015, 07:30:10 pm Which model do you have?
Earlier versions have rounded corners whereas the later models have a large square mirror... Either way should be able to be replicated at any glass/mirror shop There are some National trim pieces on ebay but if my memory serves me, they may be for a cigarette machine... Title: Re: Looking for National Candy Vending parts Post by: brmorr on August 10, 2015, 07:50:46 pm I have the earlier version with the rounded corners. The mirror has CANDY embossed in it. I tried looking on Ebay and could not find any trim pieces. My coin reject bezel on the right side is broke and missing on the outside of the machine. Probably just end up getting the mirror cut at the local shop, but need some of these bezel pieces.
Nevermind, I have the square mirror, but still need some bezel parts for where you put the coins on the right side of this machine!!! Title: Re: Looking for National Candy Vending parts Post by: Eric on August 10, 2015, 08:23:43 pm Bet you could find someone to reverse sandblast/etch the word CANDY into the back of the mirror. Ask the folks that cut the mirror.
Good Luck Title: Re: Looking for National Candy Vending parts Post by: Jim on August 10, 2015, 08:52:17 pm Do you have a photo of your machine that can be posted?
Does it look similar to the machine on the left in this picture? Title: Re: Looking for National Candy Vending parts Post by: brmorr on August 10, 2015, 09:26:40 pm Here is what I have.... I have the square corner model(my fault). You can see the broken bezel on the right in this picture, but I would take both side actually.
|