|
Title: Vmc/Vendo 81 bottle gate rollers needed Post by: Zach on June 03, 2015, 12:26:19 pm My VMC 81 7up has 8 small bottle gate rollers and one larger one that was probably added sometime during it's life as a replacement. Looking to replace it so they all match and perhaps have a spare, anyone have two of the smaller rollers? Looking for new pins for the rollers as well if anyone knows where to get those. Thanks!
Title: Re: Vmc/Vendo 81 bottle gate rollers needed Post by: MoonDawg on June 03, 2015, 01:23:34 pm Sorry Zach, you're gonna' have to find a VMC 81 parts machine for those rollers......... :biggrin:
Any Vendo or VMC squaretop has the same parts, should be an easy find. Title: Re: Vmc/Vendo 81 bottle gate rollers needed Post by: Ltransam on June 03, 2015, 02:10:24 pm Hey ,Zach I may have what you Need !!! Can You tell me the diameter ?? I have some from various machines :tounge: Title: Re: Vmc/Vendo 81 bottle gate rollers needed Post by: Zach on June 03, 2015, 11:15:17 pm Fantastic! It's about 7/16" wide and 1" long, see pics! Thank you!!!!
Title: Re: Vmc/Vendo 81 bottle gate rollers needed Post by: Ltransam on June 04, 2015, 09:49:14 pm Zach , I think I found them :). But there still on the hole assy . Title: Re: Vmc/Vendo 81 bottle gate rollers needed Post by: Zach on June 04, 2015, 09:59:04 pm I'll PM you!
Title: Re: Vmc/Vendo 81 bottle gate rollers needed Post by: collecture on June 05, 2015, 12:10:27 am Hey Zach,
I have 3 loose rollers that I got with a bunch of parts. I'll charge you the same as Leonard - nothing! PM me your address and I'll get them off to you - 1 or all 3 - LMK I think the pins used to hold them in place are just roll pins that you can get at any Ace Hardware. Title: Re: Vmc/Vendo 81 bottle gate rollers needed Post by: Zach on June 05, 2015, 09:29:11 am 3 would be nice but not for the price of nothing, I have to pay you something. I'll pm you!
Title: Re: Vmc/Vendo 81 bottle gate rollers needed Post by: Ltransam on June 05, 2015, 11:39:23 am Zack , As Tom :smile: said that's the price .If you don't take Toms Ill take mine out of the linkage's for Ya . Leonard Title: Re: Vmc/Vendo 81 bottle gate rollers needed Post by: Zach on June 05, 2015, 01:34:11 pm Thanks Leonard, I will let you know I appreciate the offer!
Title: Re: Vmc/Vendo 81 bottle gate rollers needed Post by: BrianS on June 05, 2015, 02:25:50 pm I think the pins used to hold them in place are just roll pins that you can get at any Ace Hardware. I was able to find the pins at Ace Hardware. They have them in with a bunch of other smaller items in pull out drawers located in the specialty fastener area . Be careful driving them back in place. I mi!%@$ one of mine before not paying enough attention and broke a piece off one of my bottle gates. :darn: That sucked Title: Re: Vmc/Vendo 81 bottle gate rollers needed Post by: Zach on June 09, 2015, 12:26:49 pm Thanks for the advice! I have taken note of that as that would make for a bad day.
|