|
Title: Condenser fan shroud Post by: hacksaw707 on April 23, 2015, 09:52:06 pm Ok, another newbie question. The machine I'm restoring was missing the cardboard condenser fan shroud, I purchased one from Funtronics and it has 1 long flange and 1 short flange. Which one is the top, seems to fit either way as far as side mounting holes lining up with the holes in the condenser.
Thanks for the help Ken Title: Re: Condenser fan shroud Post by: krovel on April 29, 2015, 09:55:36 pm I'm pretty sure if you give funtronics they will help you out
|