|
Title: Compressor parts Post by: on March 16, 2005, 06:31:59 pm i have a vendo 96-6 could anyone tell me where i can get the sensors on the side of the compressor
Title: Compressor parts Post by: johnieG on March 16, 2005, 10:10:49 pm
do you mean the little round over-current "klicit" (circut-breaker)? about the diameter of a quarter , sits on the side of the compressor & has two wires coming out of it, one that goes to a terminal on the compressor itself??? if so, any A.C./H.V.A.C (refrigeration) suppy house should be able to fix you up.... Title: Compressor parts Post by: on March 17, 2005, 11:44:12 am great thanks, not sure i need them both figure start at the smallest parts and work my up from there every thing comes on but the compressor i tied the 2 leads on the t-stat together but that did start the compressor i really dont want to replace the compressor deck
Title: Compressor parts Post by: on March 17, 2005, 12:17:00 pm thanks im not sure what is broke i know everything but the compressor comes on and i wired the t-stat together and same result so im gonna start with the run start and klicit'
Title: Compressor parts Post by: on April 30, 2005, 08:34:41 pm the two components on the compressor are a current relay and a klixon overload. the overload senses temp.and current draw. if either is to high it opens.the relay opens when the compressor comes up to speed after start. they sell a "does all fits all kit that replaces both. one for 1/10th thru1/5th hp.one for 1/4+1/3hp. local refrigeration supply should have it
|