|
Title: need stack part (vend cup) for 81 Post by: ld26 on March 27, 2015, 08:23:45 pm Hey guys,
anybody have the cylinder that accepts the vend crank arm on an 81D, think it's called the vend cup, here is a pic of where it would go Thanks Title: Re: need stack part (vend cup) for 81 Post by: Slapshot42 on March 27, 2015, 08:28:41 pm Funtronics sell them if you need one!
Title: Re: need stack part (vend cup) for 81 Post by: ld26 on March 27, 2015, 08:39:56 pm Thanks Jared, I searched there and didn't see it, do you have a link?
Title: Re: need stack part (vend cup) for 81 Post by: cokecolaman on March 27, 2015, 08:49:50 pm http://www.fun-tronicsllc.com/index.php?crn=251&rn=772&action=show_detail
Title: Re: need stack part (vend cup) for 81 Post by: Jonathan816 on March 27, 2015, 09:22:40 pm You guys are what I love about this site, everyone is always so quick to help someone with their questions. I know y'all have helped me plenty of times.
Title: Re: need stack part (vend cup) for 81 Post by: ld26 on March 28, 2015, 06:03:40 am The description on that part states "necessary for converting electric machines back to crank handle operation" from my pic can you guys tell if I have the wrong type of bottle stack that wouldn't have been original?
Thx Title: Re: need stack part (vend cup) for 81 Post by: cokecolaman on March 28, 2015, 09:35:22 am You might be missing more parts....can you take the stack out and take pictures of the front and back of where the cylinder cup would go?
Title: Re: need stack part (vend cup) for 81 Post by: Slapshot42 on March 28, 2015, 11:50:40 am Push the lock slide manually, than put an empty bottle in one of the slots and see if it will vends.
If it vends all you will need is a actuator and a actuator spring! Title: Re: need stack part (vend cup) for 81 Post by: ld26 on March 28, 2015, 02:54:02 pm Thanks guys I'm gonna give that a shot, not at machines location right now...
|