|
Title: Not Soda Related - National Cigarette Machine Part Post by: Jim on February 23, 2015, 09:23:48 pm Just checking to see if anyone has a box of extra National Cigarette Machine parts...
I'm looking for 1 ejector that mounts to the rotating bar for the box matches. This usually along the back of the vending mechanism located under the match columns. Before I look at having something fabricated, I thought someone somewhere might have one... :hopefull: :help: :hopefull: :help: . Title: Re: Not Soda Related - National Cigarette Machine Part Post by: collecture on February 24, 2015, 10:51:42 am Sorry I can't help Jim, but I will take four if you have some made. My machine is missing all of them.
LMK Title: Re: Not Soda Related - National Cigarette Machine Part Post by: Fire708 on February 24, 2015, 01:54:18 pm Does it have to be exact?
I understand that if its for a customer then yes, so ignore my babbling. For my v56 there were a couple of door latch parts missing. I spent many hours at our local hardware store and finally found some pieces that I modded into latch parts that work. Defintaly not original but it fills in nicely until I can get the proper stuff. Title: Re: Not Soda Related - National Cigarette Machine Part Post by: MoonDawg on February 24, 2015, 02:29:58 pm Fire, if it were for a customer they would probably never know the difference.
This part must be for Jim's machine...........HE is the perfectionist! :drinking: Title: Re: Not Soda Related - National Cigarette Machine Part Post by: Jim on February 25, 2015, 08:00:22 am This part must be for Jim's machine...........HE is the perfectionist! :drinking: It's all in the details ! ! !Sorry I can't help Jim, but I will take four if you have some made. My machine is missing all of them. If I find one, replicating the part may not occur... I'll keep you informedLMK Title: Re: Not Soda Related - National Cigarette Machine Part Post by: collecture on February 25, 2015, 12:01:31 pm If I find one, replicating the part may not occur... I'll keep you informed I understand....thanks!Title: Re: Not Soda Related - National Cigarette Machine Part Post by: collecture on February 27, 2015, 11:33:30 am Hi Jim,
Not sure if these might work for you or if you would even be interested since they are not original. They came out of a late model Westinghouse S-O-M pushbutton machine (I think they were the SO flappers). I thought I would throw it out to you. They fit on a 1/4" rod, but that could be modified I am sure. Each is about 2" tall and 1&3/8" wide. It is a spring steel piece riveted to a steel bracket. LMK Title: Re: Not Soda Related - National Cigarette Machine Part Post by: Jim on March 03, 2015, 04:16:54 pm Still looking... Hopeful I do not have to replicate these!
Tom, the shaft is too small and the dimensions are a little bigger than the original... Thanks for the input! :hopefull: :help: :hopefull: :help: :hopefull: Title: Re: Not Soda Related - National Cigarette Machine Part Post by: Slapshot42 on March 03, 2015, 06:00:20 pm I will check my National 9 Pull this evening!!
|