|
Title: Ideal 55 slug rejecter parts Post by: kevboy on February 15, 2015, 08:12:31 pm Hello everyone, I am a newbie who has been lurking on this board for a while, reading and learning, great information here. I recently bought a generic Ideal 55 slider, good body, slider rack and coin mech. The problem is the coin mech doesn't have a slug rejecter or a locking bar. I was wondering if there is a source for these missing parts? The mech that is on there now has 2 coin slots but I think I saw on the board that it will work with just 1 slug rejecter if I put it in the inboard slot on the holder. I think the cam in it is for a nickel but I am not really sure, is there a way to tell? I know that this machine will free vend without the slug rejecter and a locking bar but I want my friends to at least put in a nickel before taking all my beer and pop! Thanks in advance for any info you may have, Kevboy
Title: Re: Ideal 55 slug rejecter parts Post by: Slapshot42 on February 16, 2015, 12:34:49 am Welcome to the Site!
Check with Slider-Bob a member here on the site he may be able to assist with your mechanism or find you another one that you can use! Title: Re: Ideal 55 slug rejecter parts Post by: Slider-Bob on February 16, 2015, 12:07:48 pm Thanks for the plug Jared!
Kevboy...Welcome to the site. Contact me via PM or email. I have what you need. Slider Bob Title: Re: Ideal 55 slug rejecter parts Post by: collecture on February 16, 2015, 01:01:38 pm You say you have two slots. What denomination does your coin entry plate say? Is it 10c (insert 2 nickels or 1 dime)? Or is it 15c (insert 1 nickel and 1 dime)?
Title: Re: Ideal 55 slug rejecter parts Post by: kevboy on February 16, 2015, 02:48:06 pm Thank you fellas for the quick response to my question. collecture I'm afraid that the face plate is missing so I don't know what it said. A quarter, nickel or a dime will slide thru the slots in the rain cap and back thru the chutes to where they would drop into the rejecter. I was going to get a new faceplate depending on what configuration of coinage I ended up with. I don't care if both coin slots end up working but I would like to have one. Jared thanks for pointing me to Slider-Bob, I will message him to see what he has. Thanks again everyone, Kevboy
Title: Re: Ideal 55 slug rejecter parts Post by: kevboy on March 05, 2015, 07:33:41 pm I just wanted to add to the board that Slider Bob has supplied me with the parts that I needed. Everything is working now as it should! It was great talking to Bob and really appreciate the help and the quick response that he gave me. I hope that someday I can be as much help to someone as Bob and this board has been to me. Kevin
Title: Re: Ideal 55 slug rejecter parts Post by: collecture on March 05, 2015, 07:42:24 pm He is not known as Slider Bob for nothing!
Glad you got it working! Title: Re: Ideal 55 slug rejecter parts Post by: Slider-Bob on March 05, 2015, 08:13:37 pm You guys are making be blush! :blush:
Glad it worked out for you Kevin...This is a great forum...Many here have helped me in the past like I helped you...Glad I was able to pay one back! |