|
Title: VMC 33. screws Post by: Gmari2 on February 14, 2015, 05:46:43 am Can anyone spare some clutch head sheet metal screws, probably #6 or #8 x 3/16" sheet metal? I could use 6. They secure the painted plate that surrounds the selection lever on a VMC 33 D.
Thanks for any assistance. PM me if you have any to spare. Gmari2@verizon.net George in jersey Title: Re: VMC 33. screws Post by: Ltransam on February 14, 2015, 07:22:01 am Hi, Gmari2 I think I have a few I'll check here in a few hours and brave the cold and check in garage .ill e mail pic to confirm Title: Re: VMC 33. screws Post by: TheGarbageHunter on February 14, 2015, 07:47:42 am I also may have some.
PM me if you do not find what you need. Title: Re: VMC 33. screws Post by: johnieG on February 14, 2015, 08:34:58 am FYI, My local Corvette restoration supplier carries them as they were also used in many automobiles from the 1950's , they even carry them in stainless steel. just an alternate source for our hobby. :upside:
Title: Re: VMC 33. screws Post by: jholmgren on February 14, 2015, 10:23:58 am Hi George,
Johnnie is right - The Chevy's used a 7/16" #8 clutch-head sheet metal screw. Here's a good example: http://www.ebay.com/itm/1939-1940-1941-1946-Chevrolet-Truck-CLUTCH-HEAD-SHEET-METAL-SCREWS-8X-7-16-10p-/231167052475?pt=Motors_Car_Truck_Parts_Accessories&hash=item35d2a14abb&vxp=mtr Haven't tried them myself but will probably order some to replace the rusty ones on my 44. Jim |