|
Title: How large to drill hole in coin mechanism shaft? Post by: Jonathan816 on June 25, 2014, 09:11:25 am Taking my coin mech down to machine shop to have the shaft drilled to convert from a westinghouse to be used on my VMC 110.
Was wondering how large I should tell them to drill the hole. I don't believe I need to shorten the shaft, please correct me if I'm wrong. Title: Re: How large to drill hole in coin mechanism shaft? Post by: collecture on June 25, 2014, 05:10:56 pm 1/8" diameter
1/4" horizontal O.C. from end Will function as-is, but should have a Sold Out Flag extension on top welded to the nickel feeler. Title: Re: How large to drill hole in coin mechanism shaft? Post by: Jonathan816 on June 26, 2014, 11:52:19 am Thanks -
|