|
Title: Evaporator fan needed for coke cavalier USS 8 64 Post by: Coke536 on March 15, 2014, 07:29:58 pm Does anyone have a source for a replacement fan motor for the evaporator? It's about 2 1/2 inches tall and smaller than the condenser fan motor. I checked with the forum sponsors and they don't carry them. Thanks.
Title: Re: Evaporator fan needed for coke cavalier USS 8 64 Post by: kbareit on March 15, 2014, 08:17:51 pm If you have the round evaporator you need a #EP4 from Soda Jerk Works or a #11F from Funtronics.
Title: Re: Evaporator fan needed for coke cavalier USS 8 64 Post by: johnieG on March 15, 2014, 09:19:30 pm The USS-64 is a late model and has the rectangular Evaporator, it should take a standard unit bearing motor about a 6-watt/120Volt/1550 RPM, it mounts using the three rear #6 threaded bolts as I recall. if you have an earlier Cs or CSS model with a round evaporator coil, you can also use a standard unit bearing style motor, but only if it has a single side mounting "foot"
(http://soda-machines.com/images/stories/machines/cavalier/uss64_inside.gif) (http://soda-machines.com/images/stories/machines/cavalier/uss64.gif) (http://i21.geccdn.net/site/images/n-picgroup/PAC_10005.jpg) |