SMC Discussion Areas

Soda Machines, Coolers & Dispensers => Pre 60's Machines & Coolers => Topic started by: Victor on October 19, 2013, 07:40:45 am



Title: Vendo 44 Cans
Post by: Victor on October 19, 2013, 07:40:45 am
With the shortage of small Coke bottles that fit the Vendo 44, what other type and size of bottles would fit the 44 and has anybody ever converted one to cans, and did it work OK converted :smile:.  Thanks


Title: Re: Vendo 44 Cans
Post by: jholmgren on October 19, 2013, 08:15:29 am
Victor, if you have a Sam's Club nearby - check them out. The one in my area stocks the small 8oz bottles by the case.

The only other one I can think of is maybe some of the pony beer bottles will fit.  I guess the only way to be sure it to buy a WHOLE bunch of different ones and try them out!  (Where are you located?  I could help with the research!)   :smile:

Jim


Title: Re: Vendo 44 Cans
Post by: Victor on October 19, 2013, 08:55:40 am
I live around Dearborn Mich, There is a Sam Club close by,  I will check them out.  I was thinking about converting to Cans, What do you think.  Thanks


Title: Re: Vendo 44 Cans
Post by: cokecolaman on October 19, 2013, 09:21:00 am
I converted a VMC  44 to cans replacing the rocker arms I got from Funtronics and it works great....it was an easy conversion and you can always  put the old rockers back in.


Title: Re: Vendo 44 Cans
Post by: MoonDawg on October 19, 2013, 10:25:43 am
         You can also get a couple of cases of the old 6 1/2 oz bottles, fill them from 2 liter Coke bottles and cap them. Keep re-using the empties.


Title: Re: Vendo 44 Cans
Post by: cyberphox on October 19, 2013, 05:35:56 pm
I just converted mine to cans as well...too much work to find bottles and i'm not gonna refill bottles and cap them....plus beer comes in cans..lol


Title: Re: Vendo 44 Cans
Post by: Victor on October 21, 2013, 03:10:18 pm
I replaced the rockers On the vendo 44 with the ones for cans and they drop more than on can. I must have something in wrong. I thought I installed them right.   Any help would be nice.  Thanks


Title: Re: Vendo 44 Cans
Post by: Funtronics on October 22, 2013, 06:35:08 am
I'm not 100% sure but you may have to shim the side walls like you do for the bottles. Hopefully CokeColaman will chime in and update us on how his worked.


Title: Re: Vendo 44 Cans
Post by: cokecolaman on October 22, 2013, 08:51:39 am
I noticed when I only put a few cans in, they all came out...but when I filled it up, I didn't have any problems.


Title: Re: Vendo 44 Cans
Post by: cyberphox on October 22, 2013, 01:07:13 pm
I've heard the same thing that when it gets down to the last 2 cans it will vend both...I have mine pretty full so haven't seen this issue.


Title: Re: Vendo 44 Cans
Post by: Funtronics on October 22, 2013, 01:45:34 pm
Yes when it gets down to the last two cans it will vend them both. That is because there is no weight to wedge the can against the wall. Keeping it full helps keep the cans tight up against the wall.  :drinking:


Title: Re: Vendo 44 Cans
Post by: Victor on October 22, 2013, 03:05:28 pm
Yeper,   I filled it up and seams to be working good,   Thanks for the help.