|
Title: Ideal Slider Coin Box Disassembly? Post by: ClassicCokeLover on September 26, 2013, 07:00:15 pm I have a tall boy coin box on a machine that I am trying to salvage. How does the coin box disassemble from the machine? I had to drill out the coin box lock, and removed whats left of the removable drawer, (rusted), then removed the coin face plate, the 2 small screws on the coin bezel, and drilled out the 2 large blind rivets on the side of the top bezel. How does the chrome top come off?
:help: Title: Re: Ideal Slider Coin Box Disassembly? Post by: MoonDawg on September 26, 2013, 07:17:03 pm Behind the coin drawer there are 2 screws. Remove them and the cover lifts straight up and off.
Title: Re: Ideal Slider Coin Box Disassembly? Post by: zadd on September 26, 2013, 07:46:12 pm The chrome top is held on by a few screws on the under side .
Title: Re: Ideal Slider Coin Box Disassembly? Post by: ClassicCokeLover on September 26, 2013, 10:09:24 pm OK, got it off. Coin drawer is junk, bottom has some rot. Coin mech itself looks good with partial paper label still inside. Not worth the time I already have into it. :censored:
Title: Re: Ideal Slider Coin Box Disassembly? Post by: collecture on September 27, 2013, 09:05:37 am OK, got it off. Coin drawer is junk, bottom has some rot. Coin mech itself looks good with partial paper label still inside. Not worth the time I already have into it. :censored: A new coin box is available from Fun-Tronics or does the bottom of the cover have rot? What are you going to do with it all?Title: Re: Ideal Slider Coin Box Disassembly? Post by: ClassicCokeLover on September 27, 2013, 01:20:19 pm Tom,
I'll email you pics. |