SMC Discussion Areas

Soda Machines, Coolers & Dispensers => Post 60's Machines & Coolers => Topic started by: vintagegamer on August 18, 2013, 05:36:59 pm



Title: where is temp control knob in Vendo 125??
Post by: vintagegamer on August 18, 2013, 05:36:59 pm
I have looked everywhere.  Under the can chute, on the back of the unit, can't find it anywhere but the schem says it's there by the service cord.

Can someone pls tell me how I am missing it???


Title: Re: where is temp control knob in Vendo 125??
Post by: johnieG on August 18, 2013, 06:09:12 pm
I could tell you, but then I'd have to kill you... :oops:


Most Vendos have their thermostats located up on the left side of the evaporator, on a V125 it's hidden from view by the delivery chute, there will be no knob, just a shaft with a screw-driver slot on the end



Title: Re: where is temp control knob in Vendo 125??
Post by: vintagegamer on August 18, 2013, 06:14:58 pm
I could tell you, but then I'd have to kill you... :oops:

Aw come on.


Title: Re: where is temp control knob in Vendo 125??
Post by: johnieG on August 18, 2013, 06:24:34 pm
re-read repost... :tounge:


Title: Re: where is temp control knob in Vendo 125??
Post by: vintagegamer on August 18, 2013, 06:25:29 pm
Is it on the actual refrigeration assy like what's on the 165?

The info in the machine makes it looks like it should be in plain view.

Here is how it shows on the schem:

http://forums.arcade-museum.com/attachment.php?attachmentid=151801&d=1376867922


Title: Re: where is temp control knob in Vendo 125??
Post by: vintagegamer on August 18, 2013, 06:26:36 pm
re-read repost... :tounge:

Thanks I will try again.  This has been nuts!!!

The unit gets cold, just not as cold as I'd like it to get.


Title: Re: where is temp control knob in Vendo 125??
Post by: johnieG on August 18, 2013, 06:27:24 pm
The link will do no good if you aren't registered at that site, which I am not, nor will I... re-read my original post.


Title: Re: where is temp control knob in Vendo 125??
Post by: vintagegamer on August 18, 2013, 06:31:08 pm
The link will do no good if you aren't registered at that site, which I am not, nor will I... re-read my original post.

I tried posting the image here but it's bigger than 100k  :(

Thanks for the help with trying to track this thing down.  I'll try looking again at the machine where you have indicated.


Title: Re: where is temp control knob in Vendo 125??
Post by: vintagegamer on August 18, 2013, 06:49:42 pm
HOLY CRAP I FOUND IT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

It was dialed almost the full way clockwise, so I turned it the remainder that I could.  Hopefully that will help.  When I opened the door the thermometer that I have sitting in there was at 48, hopefully this will get her down a little bit more.