|
Title: USS 8-64 Drain Tube question Post by: bannind on June 06, 2013, 01:22:39 pm So I have removed and cleaned up my USS 8-64, I am now looking forward to re-installing the liner with insulation. The issue I am trying to wrap my noggin around is the installation of the drain tube. I am almost positive it will have to be removed for re-install (right/wrong)
Do I just put it back in once the liner is in place and silicon around the edge for seal? Title: Re: USS 8-64 Drain Tube question Post by: Slapshot42 on June 06, 2013, 01:35:01 pm You can use a 2 part epoxy, or solder it back in from the top. Make sure before re-installing the tube is cleaned out real good to prevent it from clogging in the future.
|