|
Title: Large Door Coin Mechanism / Change Giver Post by: Slapshot42 on June 04, 2013, 11:53:16 am Finally getting around to looking at my coin mechanism for my VMC 81. After a through cleaning the coin pass smooth through the rejector but there is some type of bar, or blocker in the way of the coin slots??
I assume I can remove it? Was this for free vend? Thanks! Title: Re: Large Door Coin Mechanism / Change Giver Post by: MoonDawg on June 04, 2013, 12:08:19 pm Please no not remove it. Check with Tom, he will guide you through it.
Title: Re: Large Door Coin Mechanism / Change Giver Post by: Jim on June 04, 2013, 12:33:57 pm In the picture you provided, the coin block is not reset to the starting position; it still needs to move to the left and then the coin will drop into their respective slots.
Check to be sure nothing is causing the coin block from returning to its resting position! Title: Re: Large Door Coin Mechanism / Change Giver Post by: Slapshot42 on June 04, 2013, 12:43:09 pm Jim,
I will check. Is it best to attach the crank handle on during troubleshoot? I was turning the rod with Allen wrench but it was a little bit hard to turn the rod back and forth. |