|
Title: Re-Wiring the The Compresor Box Post by: Slapshot42 on June 02, 2013, 02:12:45 pm I have to admit I'm lousy when it comes to looking and understanding wiring diagrams.
I'm trying to reremember how the wires go back in the start and overload relay. I have the condenser motor and 2 prong plug to wire back in. I purchased to 14 gauge ring terminals that I will crimp on the new wires. I know the top is the overload and the bottom is the relay. Anybody help me out? Jared Title: Re: Re-Wiring the The Compresor Box Post by: Slapshot42 on June 02, 2013, 03:33:46 pm I looked at my 81/ D Vendo and it appeared to me the same type of relay. It look like the wiring was as follows:
Condensor Motor ( 2 wires) 1 wire going to the top ( Overload) 1 wire going to the bottom ( Relay ) 2 Prong Plug ( 2 wires) 1 wire going to the the top ( Overload) 1 wire going to the bottom ( Relay) Title: Re: Re-Wiring the The Compresor Box Post by: johnieG on June 02, 2013, 06:32:22 pm It looks good from here... :biggrin: Should go like this...
Although the OEM had the fan-motor wired from the compressors terminals, if you are using an after-market wiring harness it my be easier to wire it in from there (across the socket where the compressors pig-tail plugs into) maybe. up to you. Title: Re: Re-Wiring the The Compresor Box Post by: Slapshot42 on June 02, 2013, 08:53:16 pm I looked at my 81/ D Vendo and it appeared to me the same type of relay. It look like the wiring was as follows: Condensor Motor ( 2 wires) 1 wire going to the top ( Overload) 1 wire going to the bottom ( Relay ) 2 Prong Plug ( 2 wires) 1 wire going to the the top ( Overload) 1 wire going to the bottom ( Relay) So if follow the same as my 81/ D it should work?: Title: Re: Re-Wiring the The Compresor Box Post by: johnieG on June 02, 2013, 08:55:24 pm in a word, yes it will work.
Title: Re: Re-Wiring the The Compresor Box Post by: Slapshot42 on June 02, 2013, 09:30:38 pm Title: Re: Re-Wiring the The Compresor Box Post by: Slapshot42 on June 02, 2013, 11:12:27 pm Wired up and working great!
Thanks! |