SMC Discussion Areas

Soda Machines, Coolers & Dispensers => Post 60's Machines & Coolers => Topic started by: williebman on May 23, 2013, 08:56:45 pm



Title: Help!!! Vendo vendo 56. Water ??
Post by: williebman on May 23, 2013, 08:56:45 pm
I have a vendo 56 coke machine and its always plugged in my garage I opened it up to fill it up with coke bottles and noticed a puddle of water under the compressor.How much condensation should I expect ? And is that normal to have water under the compressor.


Title: Re: Help!!! Vendo vendo 56. Water ??
Post by: mainecoke1 on May 23, 2013, 09:38:35 pm
That's completely normal. If it becomes an issue for you location the drain tube in the compressor compartment and put a drip tray under it. Since its in your garage I would just let it go.


Title: Re: Help!!! Vendo vendo 56. Water ??
Post by: williebman on May 23, 2013, 09:47:14 pm
Awesome thank you very much for your expertise


Title: Re: Help!!! Vendo vendo 56. Water ??
Post by: collecture on May 23, 2013, 10:18:15 pm
All machines should have a condensation collector, whether it is a jar or pan. You are missing something, but yes it is normal for the machine to discharge water. Amount seems to fluctuate with the humidity.


Title: Re: Help!!! Vendo vendo 56. Water ??
Post by: johnieG on May 24, 2013, 07:51:47 am
You'll find condensation water going all over the compressor area if your drain tubing is missing or cracked, and your drain pan or jar is missing.


Title: Re: Help!!! Vendo vendo 56. Water ??
Post by: williebman on May 24, 2013, 01:16:31 pm
I just looked at my compressor compartment and saw that there was a drain tube but think its plugged cuz I followed it and it drains under the machine. How do I unplug it or what's the best way about going about this ? Thanks


Title: Re: Help!!! Vendo vendo 56. Water ??
Post by: SIGNGUY on May 24, 2013, 02:12:30 pm
Stick something in it and clear out the crud, us a stiff wire or maybe just some compressed air will do it as well.

Good Luck


Title: Re: Help!!! Vendo vendo 56. Water ??
Post by: Tomahawk27 on May 24, 2013, 03:04:05 pm
Had the same issue myself. My drip tube starts in the upper cabinet under the evaporator (Westy 102) and I just bought some clear tubing, connected it, and ran it to the bottom of my machine to a pan underneath.

The clip that connects the two tubes was just allowing debris to build up. Took off the pin, ran a bent clothes hanger through it, and followed that with some compressed air.


Title: Re: Help!!! Vendo vendo 56. Water ??
Post by: cokecolaman on May 24, 2013, 04:19:16 pm
You can buy a cheap spring- drain unplugger at harbor freight for $4... It's about 2 ft long. And works great.