|
Title: Looking for national Rejector 3300 Post by: Gmari2 on March 24, 2013, 04:20:13 pm I am in the market for a national rejector 3300 series slug rejector. Info from this list tells me this is the rejector for the vendo 39, VMC 33 and others. Any assistance appreciated. PM if you've got anything.
Regards George Title: Re: Looking for national Rejector 3300 Post by: collecture on March 24, 2013, 04:59:27 pm The slug rejector you are looking for would be better ID'd as a small door rejector. The 3300 number is the model of mech and not the slug rejector. They made a several rejector models that will fit the mech - 692, 6022, 1-02-049-ND, ND-6145, etc.
In the meantime, you can screw a 6-32x3/8" machine screw(s) into the side of the mech and it will lift the lock levers (some people call them 'dogs') up and you can vend all day long without coins needed. Good luck in your quest and welcome to the board! Title: Re: Looking for national Rejector 3300 Post by: Gmari2 on March 24, 2013, 06:48:46 pm Thanks for that clarification. It's very helpful.
George |