SMC Discussion Areas

Soda Machines, Coolers & Dispensers => Pre 60's Machines & Coolers => Topic started by: Ezra on March 21, 2013, 11:30:47 pm



Title: Lower Side Louver Vent Column/s 81D?
Post by: Ezra on March 21, 2013, 11:30:47 pm
Did all Vendo 81D have 2 columns of side louver vent fins along the bottom sides?

If someone wanted to use a Vendo 80 cabinet to assemble a 81D, Ive noticed some of the 80s have single vs  dual columns of vent fins along the bottom sides.


Thank You


Title: Re: Lower Side Louver Vent Column/s 81D?
Post by: coke_and_stuff on March 24, 2013, 08:43:26 am
Early Vendo 80, 81, 110 had the large single vents on the sides, the later had the split vents, Same goes with VMC 81, and 110.

Yes a Vendo 80 cabinet will work for a 81. But a large vent cabinet would not be correct for a Vendo 81D, and a split vent cabinet would not be correct for a Vendo 81A etc. But 99% of the people looking at it would not know.

Joey


Title: Re: Lower Side Louver Vent Column/s 81D?
Post by: Ezra on March 24, 2013, 10:38:44 am
Joey, thank you for your help.