|
Title: Decal for Glasco Slider Post by: ClassicCokeLover on March 12, 2013, 07:39:23 am Does anyone re-produce a "correct" decal for the front of a Glasco Coke slider. Attached is a picture of the original logo on left, and the recently purchased decal on right. (Not the correct scale as original).
Title: Re: Decal for Glasco Slider Post by: Kilroy on March 12, 2013, 07:53:47 am Funtronics carries it
http://www.fun-tronicsllc.com/index.php?crn=339&rn=1183&action=show_detail (http://www.fun-tronicsllc.com/index.php?crn=339&rn=1183&action=show_detail) Title: Re: Decal for Glasco Slider Post by: ClassicCokeLover on March 12, 2013, 09:26:10 am That's the one on the right.
Title: Re: Decal for Glasco Slider Post by: Eric on March 12, 2013, 10:45:00 am If you could trace it (doesn't have to be perfect) on some parchment/tracing paper and send it to
me I could scan and rebuild it and send you the file. Title: Re: Decal for Glasco Slider Post by: cola62 on March 12, 2013, 10:48:37 am I had that same issue with my Glasco when I refinished it. You are correct, the original is more narrow in the center.
Title: Re: Decal for Glasco Slider Post by: ClassicCokeLover on March 12, 2013, 06:08:25 pm Too bad someone hasn't come up with a silk screen for this logo. Seems like it would be very popular. I have since removed the decal, just doesn't look right.
Title: Re: Decal for Glasco Slider Post by: Eric on March 12, 2013, 09:05:04 pm you can use vinyl masking and it does the same thing... It's what I used on my coolers to paint the letters on...
If someone has a original they can trace I can scan and make the art for masking... Title: Re: Decal for Glasco Slider Post by: mygoose101 on March 12, 2013, 11:20:17 pm If you are restoring the machine, just use the vinyl one then clear over it so when you run your hand over it you won't even feel it.
|