SMC Discussion Areas

Trouble-Shooting => Refrigeration => Topic started by: on November 14, 2004, 11:36:55 pm



Title: I have r12, can i charge my system?
Post by: on November 14, 2004, 11:36:55 pm
Do the cooling systems in the 60's-70's machines usually have a valve in one the low side lines so you can charge your system?


Title: I have r12, can i charge my system?
Post by: johnieG on November 15, 2004, 09:44:09 am
Depends on the manufacture, & if the unit had been serviced before, in which case, it would have had on added. look along the low side ( usually the large copper line coming for the evaporator inside the machines bottle/can area) & follow it back to the compressor. if it does have one, you'll see it.

Lacrosse was one of the manufactures of vending machines that actually did have service valves right on their compressors, however I've noticed that the sealed compressors , such as ones that came with Vendo's & Cavaliers didn't. you got me curious & when I looked around my barn & found that the following machines of mine did have a service valve(s) right on the head of the compressor(s)

LaCrosse LVC100 60's RC-Cola bottle/shelf vendor
GE Chest cooler, (40's double-dot) wet type

however the Westinghouse WD12 (50's), WC102MD (60's), Vendo 2-V63/1-V90 (60's) squarecorners with sealed compressors & my Ideal 55B's don't (I've added a few myself when replacing compressors)

I recently sold a late model (bubble front) Vendo can vendor & it did not.