SMC Discussion Areas

Soda Machines, Coolers & Dispensers => Pre 60's Machines & Coolers => Topic started by: coke_and_stuff on November 09, 2004, 12:25:24 pm



Title: Vendo parts that will interchange
Post by: coke_and_stuff on November 09, 2004, 12:25:24 pm
Im not sure if this is the right place or not but here goes. Im slowly putting a Vendo 81D together from misc parts. Pretty much starting from nothing and building a machine up. My questions are what parts will interchange, heres my list theres possibly more but this is what I need.

Large coin door 56, 81D, 110 large door, ??80??
Cabinet 81, ??80??
main Door hinges
main door latch
bottle stack
shelves
liner
chrome trim
coin mech

will any of the parts above inerchange from other machines, thanks for any info its appreciated

Joey


Title: Vendo parts that will interchange
Post by: MoonDawg on November 09, 2004, 08:13:26 pm
Large coin door-56 / 81/ 110----Yes.  Vendo 80--NO!
   Cabinet 81 /80 yes
   Liner- 80 will need locator pins and holes for bottle stack
   Main door hinges 80 / 81 / 39.  Not 110 or 56
   Door latch 81 / 39/ 56
   Bottle stack 81 round corner only
   shelves 81 with square or round corners
   chrome trim / 81 only
   coin mech - Vendo 56 / 81 / 110 / and Westinghouse          42 /44 /96


Title: Vendo parts that will interchange
Post by: coke_and_stuff on November 09, 2004, 09:11:29 pm
Thanks, very very helpful I appreciate it!!

Joey


Title: Vendo parts that will interchange
Post by: on November 10, 2004, 10:21:54 am
hi,
if you are looking for vendo 81 parts try it on ebay.
there are many parts for a vendo 81 at the moment (main door, coin door ...).
good luck and greetings lars
 :cool:


Title: Vendo parts that will interchange
Post by: coke_and_stuff on November 10, 2004, 12:14:09 pm
Thanks for the info, I picked up a main door last week off of Vintage Vending, the light bar, coin door, and coin entry bezel are all on my watch list

Joey