|
Title: Is your machine level? Post by: Slapshot42 on January 27, 2013, 11:30:28 pm Just finished a little project on my RT 56.
It always teeter tottered and the leg levels were rusted solid. I tried various types of products and nothing would loosen any of the leg levelers. I already had the compressor out so I just drilled out the old ones. Ordered the inserts from SJW, and the leg levelers from FunT. I looked around the local box stores and the closest I found was 5 /8 and they were for wood. They are a 3/8 (16) insert and so our he levelers. My neighbor a mechanic had a wire feed welder which only took about 10 mins. Title: Re: Is your machine level? Post by: pinballdude on January 28, 2013, 08:19:29 am Looks exactly like pinball leg levelers.
Title: Re: Is your machine level? Post by: Ltransam on January 28, 2013, 09:46:04 am Looks Great !!! Make Sure You Put Greese on the threds . I use Loctite C5-A Anti-Seize compond . When Ever i get a new Machine Before i slide it off the truck I remove/drill out the Levelers & Clean & Lube them . Title: Re: Is your machine level? Post by: Slapshot42 on January 28, 2013, 09:36:56 pm Did exactly that Leonard !
Make a big difference worth the extra $15.00 and the labor to go with it. Jared |