|
Title: Need this missing part on my slug rejector Post by: cormy on January 13, 2013, 07:51:15 pm Dont know what its called but it directs the coin once dropped in the coin slot. Also missing the little shaft it mounts on.
Thanks!! Title: Re: Need this missing part on my slug rejector Post by: collecture on January 13, 2013, 11:32:49 pm You are missing the nickel cradle and post.
I have a post, but no cradles. You can make nickel cradles from some LD rejectors (not all) work. Title: Re: Need this missing part on my slug rejector Post by: cormy on January 14, 2013, 11:48:29 am You are missing the nickel cradle and post. I have a post, but no cradles. You can make nickel cradles from some LD rejectors (not all) work. Thanks but what does that mean? LD rejector? Title: Re: Need this missing part on my slug rejector Post by: Kilroy on January 14, 2013, 11:54:24 am LD = Large Door, Think V81D, V110, the coin door is larger than say a Vendo 39 or Vendo 56, so the coin mech is also larger
Title: Re: Need this missing part on my slug rejector Post by: MoonDawg on January 14, 2013, 11:56:48 am You should just mail the rejector to the expert, Tom will find a cradle and post, install them and return it to you working.
Title: Re: Need this missing part on my slug rejector Post by: cormy on January 14, 2013, 04:44:55 pm I guess if all else fails, but I'm kind of a do it yourself guy.
Title: Re: Need this missing part on my slug rejector Post by: cormy on April 09, 2013, 03:48:15 pm Still looking but I did find the little post on the bottom of the coin door...it's a start :laugh:
|