Title: Cavalier 64e solenoid will not engage
Post by: on November 03, 2004, 03:56:59 pm
Hi, just brought home a really nice Cavalier 64E. The coin mech accepts the money, will give change but does not engage the solenoid to release the bottle gates.
I checked and power is getting to the solenoid, I can move the mechanism manually and the gates open but either the solenoid is dead or the coin mech isn't giving it the signal to work, any idea which of the two it might be.
I used to have a Cavalier 72 and seem to remember that the solenoid always made a low humming noise the solenoid is not making any noise now.
Thanks in advance.
I checked and power is getting to the solenoid, I can move the mechanism manually and the gates open but either the solenoid is dead or the coin mech isn't giving it the signal to work, any idea which of the two it might be.
I used to have a Cavalier 72 and seem to remember that the solenoid always made a low humming noise the solenoid is not making any noise now.
Thanks in advance.
Title: Cavalier 64e solenoid will not engage
Post by: johnieG on November 03, 2004, 09:27:52 pm
Well, you can try the old jumper pins 1&3 on the jones socket trick & see if the solenoid is functional, if it works, then the coinmech is at fault, if not, then the solenoid is open.
Title: Cavalier 64e solenoid will not engage
Post by: Pat Pixley on November 04, 2004, 08:02:37 am
Hi there Jeff, you might want to get in touch with loman4ec
( Josh) he is parting out A cavalier 64 he might still have a
solenoid left.
Pat P.
( Josh) he is parting out A cavalier 64 he might still have a
solenoid left.
Pat P.
Title: Cavalier 64e solenoid will not engage
Post by: loman4ec on November 04, 2004, 08:10:31 am
Nope I sold the entire bottle rack a few weeks ago. I see that funtronics sells a new one for only $24.00. It is part #97A. give them a call at (301)371-5246. If you don't have one already it is worth buying a catalog.
Title: Cavalier 64e solenoid will not engage
Post by: on November 04, 2004, 12:16:20 pm
Thanks for the help, can you explain to me the Jones Socket Trick?
Title: Cavalier 64e solenoid will not engage
Post by: johnieG on November 04, 2004, 10:11:58 pm
Sure, to test the vending circut & help you determine if your troubles are caused by either the Coinmech not sending a vend pulse, or the solenoid being open.
1. unplug the coinmech
2. using an insulated piece of 16 gauge wire (ends striped bare) insert one end into the jones socket's pin no.1, per the above pinout diagram (be careful, the other end of the wire will have line voltage on it!) now briefly touch the other end onto (in) the jones socket's no.3 pin no more than 1/2 to 1 second maximum
if the solenoid "kicks" in , it's the coinmech at fault.
if it doesn't then the solenoid is either open, or the wiring is suspect between pin #3 on the jones socket & the one side of the solenoid or possibly the wiring harness's connector
( the pale white rectangular looking plastic thing down by the bottom of the door) , is corroded . check your machines wiring diagram, it should be on the back side of the main door.
hope this helps you out...JohnieG
1. unplug the coinmech
2. using an insulated piece of 16 gauge wire (ends striped bare) insert one end into the jones socket's pin no.1, per the above pinout diagram (be careful, the other end of the wire will have line voltage on it!) now briefly touch the other end onto (in) the jones socket's no.3 pin no more than 1/2 to 1 second maximum
if the solenoid "kicks" in , it's the coinmech at fault.
if it doesn't then the solenoid is either open, or the wiring is suspect between pin #3 on the jones socket & the one side of the solenoid or possibly the wiring harness's connector
( the pale white rectangular looking plastic thing down by the bottom of the door) , is corroded . check your machines wiring diagram, it should be on the back side of the main door.
hope this helps you out...JohnieG
Title: Cavalier 64e solenoid will not engage
Post by: on November 06, 2004, 01:49:30 pm
Well I tried that trick and the solenoid didn't start, plus I tried a new coinmech that I know to be working and that didn't work so I guess my solenoid is dead. I am going to order one from funtronics, are they pretty easy to install?
Title: Cavalier 64e solenoid will not engage
Post by: johnieG on November 06, 2004, 04:26:31 pm
Glad it helped you figure out what was going on. Yea, they go in pretty easily, a few screws, a cotter-pin & the wire connectors,
Title: Cavalier 64e solenoid will not engage
Post by: Kevin C on November 17, 2004, 10:28:37 pm
Hello
Will the funtronics have a vend solenoid for my Vendo 63?
Kevin
Will the funtronics have a vend solenoid for my Vendo 63?
Kevin
Title: Cavalier 64e solenoid will not engage
Post by: johnieG on November 18, 2004, 11:42:17 am
A quick phone call will tell!