Title: Coinco 75-9800b
Post by: on September 24, 2004, 02:25:29 pm
WHAT IS THE SLIDE SWITCH FOR ON THE FRONT LOWER RIGHT HAND CORNER USED FOR?
Title: Coinco 75-9800b
Post by: johnieG on September 24, 2004, 03:50:55 pm
Hi! & welcome, it's used to eject the nickles from the change tubes (also called an inventory switch)
Title: Coinco 75-9800b
Post by: on September 24, 2004, 04:06:21 pm
both tubes are for the nickles? just fill them up?
Title: Coinco 75-9800b
Post by: Jim on September 24, 2004, 06:38:36 pm
Fill them at least half way so the switches are activated to indicate the machine can deliver change.
Title: Coinco 75-9800b
Post by: on September 24, 2004, 09:12:24 pm
THANKS JIM! DOES THE COIN MECH HAVE ANY EFFECT ON THE COOLING UNT?
Title: Coinco 75-9800b
Post by: on September 24, 2004, 09:14:53 pm
IF THERE IS NO NICKLES IN THE TUBES, SHOULDN'T THE "USE CORRECT CHANGE" LIGHT ILLUMINATE?
Title: Coinco 75-9800b
Post by: ussexplorer on September 25, 2004, 12:10:37 am
Yes, if no change is in the tubes. It should produce a used correct change light. Check to make sure the little metal tabs are not stuck in on the coin mech. Also check you light bulb.
later,
ussexplorer
later,
ussexplorer
Title: Coinco 75-9800b
Post by: johnieG on September 25, 2004, 06:44:57 am
| Quote (KUEBERCO @ Sep. 24 2004,10:12) |
| THANKS JIM! DOES THE COIN MECH HAVE ANY EFFECT ON THE COOLING UNT? |
Nope, it doesn't effect the cooling system, It's on a seperate electrical circut. (or should be anyways
)...JohnieGTitle: Coinco 75-9800b
Post by: on November 22, 2004, 01:40:16 pm
Good day folks Im new to the coca cola vending machine owners world but have a good degree of common sense. I cant seem to make the coinco mech. take quarters it wants to spit them out to the change slot. I have a vendo V156-276. I dont know the age.Title: Coinco 75-9800b
Post by: Jim on November 22, 2004, 02:29:36 pm
Hello Mike,
Welcome!
Have you loaded nickels into the nickel tube(s)...?
Does the machine deliver when dimes & nickels are used...?
Do you have the same coin mech as this thread is under, the Coinco 75-9800b...?
Welcome!
Have you loaded nickels into the nickel tube(s)...?
Does the machine deliver when dimes & nickels are used...?
Do you have the same coin mech as this thread is under, the Coinco 75-9800b...?