|
Title: need a little Help on A Cav CS 64 F Post by: Pat Pixley on September 24, 2012, 11:52:35 pm Ok restoring a Cavalier CS64F and in a hurry I forgot to snap a picture of the coin Door Hinge area , So I'm stuck and
need to see a picture of the inside hinge area . (http://i214.photobucket.com/albums/cc125/Vernors131/CavCS64F001.jpg) this the parts ,and here is a picture of the machine (http://i214.photobucket.com/albums/cc125/Vernors131/Cavalier%20CS64/Machines008.jpg) So a photo would help get right in there if you can . Thanks Pat Title: Re: need a little Help on A Cav CS 64 F Post by: Funtronics on September 25, 2012, 06:58:28 am Here are the only pictures that I have. I took these when I restrored one a few months back for my son. Hope this helps..
Title: Re: need a little Help on A Cav CS 64 F Post by: memorylane on September 25, 2012, 07:07:16 am This help, same type of door
Title: Re: need a little Help on A Cav CS 64 F Post by: Pat Pixley on September 25, 2012, 10:38:37 am What I need is to see how the long red narrow peice fits and where it goes ? To the Coin Door or to the main door ?
Thanks Title: Re: need a little Help on A Cav CS 64 F Post by: tkaz on September 25, 2012, 04:27:05 pm Checked all my photos and a bunch online and can't find a single one that shows the inside of the hinge, looks like it was setup different on the CSS and USS machines
Title: Re: need a little Help on A Cav CS 64 F Post by: Pat Pixley on September 25, 2012, 06:02:23 pm Does anybody have a old cavalier CS64 that they can snap a few picture of so I can get this figured out ??
really need the help. THanks Pat Title: Re: need a little Help on A Cav CS 64 F Post by: memorylane on September 25, 2012, 07:01:00 pm Pat I beleave that piece fits between the hinges on the bottle door. There should be screws holes when you open the bottle door, it's a filler piece.
Title: Re: need a little Help on A Cav CS 64 F Post by: memorylane on September 25, 2012, 07:06:38 pm Hope this helps
Title: Re: need a little Help on A Cav CS 64 F Post by: MoonDawg on September 25, 2012, 07:43:02 pm I checked my Cavaliers and the coin doors attatch directly to the machine with the stainless hinge you show in your pic. Maybe the red piece goes somewhere else?
Title: Re: need a little Help on A Cav CS 64 F Post by: cohammer on September 25, 2012, 08:51:05 pm don't know if this helps
Title: Re: need a little Help on A Cav CS 64 F Post by: Pat Pixley on September 25, 2012, 09:15:40 pm Is that cap catcher there if so can you remove it and re-snap a picture :hopefull: Thanks Pat
Title: Re: need a little Help on A Cav CS 64 F Post by: memorylane on September 25, 2012, 10:43:11 pm Is this it above the coin return plunger
Title: Re: need a little Help on A Cav CS 64 F Post by: cohammer on September 26, 2012, 08:00:54 pm sorry it took me a while to get back,I think that flat bar is the one inside the door below and between the hinges
|