|
Title: Cavalier USS-8-64 Parts Machine Post by: Jim on August 27, 2012, 09:05:00 pm Hello everyone,
I am beginning to part out a USS-8-64. The following items are not available as they are missing or not functioning: Refrigeration System; although the condensation fan/housing is functional. Coin Mech and Cap Catcher The vending rack will vend bottles/cans and the vend solenoid is functioning Anything else can be considered available ! ! ! Just contact me with your needs or if you would like photos... The machine below is the actual machine the parts will come from... Title: Re: Cavalier USS-8-64 Parts Machine Post by: Creighton on August 27, 2012, 10:35:19 pm If that is a light up sign in good shape I'd be interested.
Thanks! Creighton Title: Re: Cavalier USS-8-64 Parts Machine Post by: Jim on September 04, 2012, 03:47:21 pm Creighton,
My apologies for the delay! This is a light up marquee so just let me know if you need any better photos or descriptions... Title: Re: Cavalier USS-8-64 Parts Machine Post by: Creighton on September 04, 2012, 08:13:34 pm Jim,
No worries! PM sent. Creighton Title: Re: Cavalier USS-8-64 Parts Machine Post by: Pinplayers on September 13, 2012, 07:23:23 am Jim sent you an email regarding some parts LMK if you didn't get it.
Don Title: Re: Cavalier USS-8-64 Parts Machine Post by: Jim on September 15, 2012, 05:33:39 pm I have removed the following parts:
Coin Door, bezel and coin chute. (May have sold "SS Change Bezel") Bottle Door - complete Stainless Steel Bottle Door Opening Trim w/ bulb sockets, also have plexi bulb cover and retaining clip Complete set of 8 shelves w/ adjustable guides Evaporator fan shroud w/ working fan motor and original cord & plug Working condensor fan w/ bracket Complete functioning vending stack, bottles or cans! Partial wiring harness: from compressor, to thermostat, to power distribution block, to terminal block, to vending solenoid/switch. (Picture available to aid) Aluminum textured door liner is in good condition Both rubber gaskets for the main door and bottle door are in good useable condition Also have small misc. parts such as coin box bracket, Jones Socket w/ box & cover, coin return pull assembly, etc, etc... If anyone needs something else not mentioned, please contact me soon as this cabinet & main door will be gone Tues! Title: Re: Cavalier USS-8-64 Parts Machine Post by: jimq on September 26, 2012, 07:53:22 am I need one shelf! Please reply at jimq1002 at gmail.com
Title: Re: Cavalier USS-8-64 Parts Machine Post by: charlesmountjr on November 09, 2012, 03:48:38 pm I need a shelf and a spacer if you still have it. Email me at chuck@mountpoint.org.
Thanks! Title: Re: Cavalier USS-8-64 Parts Machine Post by: Jim on November 13, 2012, 09:36:55 am I'm still out on the road and will reply when I get settled at home this weekend...
Title: Re: Cavalier USS-8-64 Parts Machine Post by: Roadman on November 17, 2012, 07:33:32 pm A little off the topic - I have a USS64 - restored - (actualy it's a USS48, same machine though). Anyone know the years this machine was produced?
Title: Re: Cavalier USS-8-64 Parts Machine Post by: tkaz on November 17, 2012, 08:08:02 pm They were generally made in the early 70s, I believe most of the USS-48's were for Pepsi, where the 64's were for Coke. The four or five I have had were all made in 73 and 74
Title: Re: Cavalier USS-8-64 Parts Machine Post by: Roadman on November 18, 2012, 09:15:28 am Thanks Tkaz! I really like my USS64 - it seems to vend almost anything and its easy to use.
Title: Re: Cavalier USS-8-64 Parts Machine Post by: sledworks on December 02, 2012, 01:12:53 pm I could use a coin box and cap catcher box. I'm assuming they would fit my CS64?
Jimmy |