|
Title: How to remove wires from Molex connector Post by: navychi on August 15, 2012, 02:28:38 pm Can anyone please tell me if I can replace the wires in a Molex connector and how it is done?
Thanks, Doc Title: Re: How to remove wires from Molex connector Post by: Blind1968 on August 15, 2012, 02:59:32 pm What exactly is it that your working on? :Oo:
Here is video on how to replace the connector http://www.youtube.com/watch?v=TcV7l1pER2M Title: Re: How to remove wires from Molex connector Post by: navychi on August 15, 2012, 03:05:52 pm I am restoring a Lacrosse and re-wiring and want to run the new wires into the female side of the molex plug instead of butt splicing.
Title: Re: How to remove wires from Molex connector Post by: Blind1968 on August 15, 2012, 04:31:26 pm I am not very familiar with the Lacrosse wiring or the Molex connectors your referring to but I would think you should be able to replace any of the the wiring and the connectors as long as the replacement parts are rated for the job and are the proper gauge. Probably get all the parts you need at Radio Shack.
Title: Re: How to remove wires from Molex connector Post by: collecture on August 15, 2012, 04:51:00 pm I think you can just buy a new connector from Mouser.com
http://www.mouser.com/Search/Refine.aspx?Keyword=.093+molex+connector Title: Re: How to remove wires from Molex connector Post by: navychi on August 17, 2012, 07:44:44 am Here are pictures of the connector if that helps
Title: Re: How to remove wires from Molex connector Post by: Blind1968 on August 17, 2012, 09:30:32 am Ok that is a Jones Socket, if you want to replace it I would go to the (Mouser.com) link that Collecture posted earlier and type in Jones Socket. :smile:
|