|
Title: Westinghouse WC-60 Locxking Bar Assembly Needed ! ! ! Post by: Jim on July 16, 2012, 10:08:22 am Hello,
Looking to see if I can locate a locking bar assembly for the mentioned machine, Westinghouse WC-60 (http://soda-machines.com/index.php?option=com_content&task=view&id=670&Itemid=14) I have the opportunity to purchase for $300 but missing locking bar... Any direction appreciated in advance! Jim Title: Re: Westinghouse WC-60 Locxking Bar Assembly Needed ! ! ! Post by: johnieG on July 16, 2012, 12:04:27 pm I believe a WC78 locking bar will also fit the WC60 as well, (the actual coindoor door will not however) so maybe it will double your chances of locating one.
Title: Re: Westinghouse WC-60 Locxking Bar Assembly Needed ! ! ! Post by: dr galaga on July 16, 2012, 12:44:53 pm If the coin door is the same as a WB102 (mine looks like a WC), I can set you up. I'll be parting this machine out.
Title: Re: Westinghouse WC-60 Locxking Bar Assembly Needed ! ! ! Post by: Jim on July 16, 2012, 03:24:28 pm I would have to agree w/ Johnie in that the same locking bar any have been utilized on both WC/WD-60 & WC/WD-78
For what it may be worth, the measurement between the two locking bar support brackets welded to the coin door are approx. 15 5/8" apart... I'm going to see if I have a manual and research a little further before I decide to purchase... Thanks for the replies too! Anyone else have a parts machine WC/WD-60...? Title: Re: Westinghouse WC-60 Locxking Bar Assembly Needed ! ! ! Post by: Jim on July 19, 2012, 01:54:10 pm Anyone able to confirm whether or not you have a locking bar...?
Haven't committed to the purchase until I have a good lead on one... Thanks ! ! ! Title: Re: Westinghouse WC-60 Locxking Bar Assembly Needed ! ! ! Post by: dr galaga on July 21, 2012, 12:35:26 pm I had a chance to get to my parents place this morning. Looks like what I have should work for you Jim (brackets are about 15 5/8" apart). I emailed you a picture.
Title: Re: Westinghouse WC-60 Locxking Bar Assembly Needed ! ! ! Post by: Jim on July 21, 2012, 03:17:18 pm Thanks Brent ! ! !
PM with a price; I have a call into the seller to see if $250 - $275 will land me the machine... |